Software Manual Freedom EVOware Standard 2.3 Freedom ...

A - Appendix A
LogViewer Tool
Fig. A-41 LogViewer, showing the Find window and a bookmark (Message Details window not shown)
The tree structure of the Channels window is automatically adjusted to match the
contents of the currently open log file. Some of the sub-channels may be missing
if the log file does not contain any messages for these sub-channels.
You can expand the Drivers channel to view the sub-channels it contains by
clicking on the ’+’ box on the left side. Click the ’-’ box if you want to collapse the
Drivers channel again.
If you expand the Drivers channel, check the RoMa checkbox and uncheck all
other checkboxes in the Channels window, the Message List window will only
show messages which have come from the RoMa device driver (if there are any to
show) and not from the other device drivers.
When investigating a particular event or problem, it can be helpful to select only
those channels (message types) which are directly relevant and to uncheck the
checkboxes of all other channels.
You can also select channels as follows:
Left click on a check box
Selects / deselects only this channel.
Right click on the label (name) of a check box
Opens a drop down list which allows you to choose between select all and
deselect all.
Right click on a check box
Selects / deselects this channel and all of its subchannels.
When the LogViewer has just been installed, the channel selections of the five
tabs in the Message List window (EVOlution, EVOware, General, RspCommands
and Setup & Service) are pre-configured to filter and display only those messages
which are relevant for that tab. The channel selection can be adjusted by the user
and is automatically saved in a user profile which is associated with the MS
Windows user name. When you start the LogViewer again later, the last used
channel selection is automatically re-activated. A separate channel selection is
saved for each user for each of the five tabs. See also A.10.2 “Using the Message
List window”, A-74.
Freedom EVOware Software Manual, 393172, en, V2.3 A - 73