Software Manual Freedom EVOware Standard 2.3 Freedom ...

9 - Specifying Your Instrument Setup
Configuring Labware
Tab. 9-21 Labware attributes, hidden (cont.)
Field name Default value Description
Plate type 1 Read-only field - please set this attribute with
the Washer plate type field in the advanced
labware settings. This variable is used by the
Columbus Washer. It overwrites the plate type
specified with the Columbus WashPlate
device command.
File (obsolete) This field is no longer used.
Source barcode (Plus
only)
Base location
Barcode ID of the mother plate
Read-only field - Freedom EVOware writes
the home location of the labware to this field
when the labware is created.
Base position 1,1,1 Read-only field - Freedom EVOware writes
the labware position within the base location
to this field when the labware is created.
Finger type (obsolete)
Location
This field is no longer used.
Read-only field - Freedom EVOware writes
the current location of the labware to this field
when the script or process is running.
Position 1,1,1 Read-only field - Freedom EVOware writes
the current position of the labware within the
current location to this field when the script or
process is running.
Grip narrow 8.5 The spacing (in cm) between the RoMa grippers
which should be used to grip the labware
on the narrow side. To ensure a firm grip, the
grippers will try to close by an additional 1 cm
(this is limited by the specified grip force).
Grip wide 12.5 The spacing (in cm) between the RoMa grippers
which should be used to grip the labware
on the wide side. To ensure a firm grip, the
grippers will try to close by an additional 1 cm
(this is limited by the specified grip force).
Offset between
stacked plates (obsolete)
0,0,1 For stacked plates, distance from the bottom
of the plate to the bottom of the next plate
above a) . This field is no longer used.
Stacker type 1 Read-only field - please set this attribute with
the Stacker plate type field in the advanced
labware settings.
9 - 36 Freedom EVOware Software Manual, 393172, en, V2.3