Software Manual Freedom EVOware Standard 2.3 Freedom ...

More documents

Recommendations

Info

16 - Device Commands Commands for the Te-VacS 16.35.10 Te-VacS - PositionPlateRear Command The PositionPlateRear command is only relevant if the Te-VacS is fitted with the Repositioner option. This option allows the contents of four subsequent 96-well SPE plates (e.g. TecPrep 96 microplates) to be extracted to one 384-well collection plate (e.g. a MALDI target). The collection plate is placed on a movable carrier. The PositionPlateRear command moves the collection plate for the rear vacuum block into one of four positions before you apply the vacuum. After extracting liquid from one of the 96-well microplates, it is replaced by another microplate and the collection plate is moved by 4.5 mm in the X and/or Y direction to the new position. The collection plate can be moved to the following positions: • left/rear • left/front • right/rear • right/front. Execution parameters You are prompted to specify the following execution parameters when you add this command to your script or process: Fig. 16-85 Te-VacS - PositionPlateRear command Position Choose the required position of the collection plate. To view or edit the execution parameters again later, right-click on the script command in the Script Editor and choose Edit in the context menu. 16.35.11 Te-VacS - PositionPlateFront Command The PositionPlateFront command is only relevant if the Te-VacS is fitted with the Repositioner option. This option allows the contents of four subsequent 96-well SPE plates (e.g. TecPrep 96 microplates) to be extracted to one 384-well collection plate (e.g. a MALDI target). The collection plate is placed on a movable carrier. The PositionPlateFront command moves the collection plate for the front vacuum block into one of four positions before you apply the vacuum. After extracting liquid from one of the 96-well microplates, it is replaced by another plate and the collection plate is moved by 4.5 mm in the X and/or Y direction to the new position. The collection plate can be moved to the following positions: • left/rear • left/front • right/rear 16 - 118 Freedom EVOware Software Manual, 393172, en, V2.3
16 - Device Commands Commands for the Te-MO • right/front. Execution parameters You are prompted to specify the following execution parameters when you add this command to your script or process: Fig. 16-86 Te-VacS - PositionPlateFront command Position Choose the required position of the collection plate. To view or edit the execution parameters again later, right-click on the script command in the Script Editor and choose Edit in the context menu. 16.35.12 Te-VacS - OpenDesaltingValve Command The OpenDesaltingValve command opens the desalter valve to drain the residues. It is only relevant for Te-VacS versions which are equipped with a desalter valve. Execution parameters You are prompted to specify the following execution parameters when you add this command to your script or process: Fig. 16-87 Te-VacS - OpenDesaltingValve command Open time Specify how long you want to open the desalting valve (range: 1 - 60 seconds). To view or edit the execution parameters again later, right-click on the script command in the Script Editor and choose Edit in the context menu. 16.36 Commands for the Te-MO The Te-MO is a robot pipetting device which can be attached to the worktable of the pipetting instrument. It is equipped with a specially designed pipetting system Freedom EVOware Software Manual, 393172, en, V2.3 16 - 119
Page 1 and 2:
Software Manual Freedom EVOware ®
Page 3 and 4:
Table of Contents Table of Contents
Page 5 and 6:
Table of Contents 6 Menus 6.1 File
Page 7 and 8:
Table of Contents 8 Configuration T
Page 9 and 10:
Table of Contents 9 Specifying Your
Page 11 and 12:
Table of Contents 11 Getting Starte
Page 13 and 14:
Table of Contents 13.2.40 Commands
Page 15 and 16:
Table of Contents 15.30.2 Serial Di
Page 17 and 18:
Table of Contents 15.68.10 MCA96 Mo
Page 19 and 20:
Table of Contents 16.6.12 Columbus
Page 21 and 22:
Table of Contents 16.27.3 Safire Re
Page 23 and 24:
Table of Contents 17 Special Featur
Page 25 and 26:
Table of Contents 19 Customer Suppo
Page 27 and 28:
Table of Contents B Appendix B - FD
Page 29 and 30:
1 - About This Manual 1 About This
Page 31 and 32:
1 - About This Manual Reference Doc
Page 33 and 34:
1 - About This Manual Context-Sensi
Page 35 and 36:
2 - Safety User Qualification 2 Saf
Page 37 and 38:
2 - Safety Specific Hazards 2.4 Spe
Page 39 and 40:
2 - Safety Safety Features of the P
Page 41 and 42:
2 - Safety Specific Safety Rules op
Page 43 and 44:
3 - Product Description Overview of
Page 45 and 46:
3 - Product Description Intended Us
Page 47 and 48:
3 - Product Description Supported P
Page 49 and 50:
3 - Product Description Computer Re
Page 51 and 52:
4 - Installation Before You Start 4
Page 53 and 54:
4 - Installation Installing Freedom
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
4 - Installation Modifying, Removin
Page 61 and 62:
4 - Installation Modifying, Removin
Page 63 and 64:
4 - Installation Installing the USB
Page 65 and 66:
4 - Installation Installing the USB
Page 67 and 68:
5 - Starting Freedom EVOware Login
Page 69 and 70:
5 - Starting Freedom EVOware Login
Page 71 and 72:
5 - Starting Freedom EVOware Startu
Page 73 and 74:
5 - Starting Freedom EVOware Startu
Page 75 and 76:
5 - Starting Freedom EVOware Overvi
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
6 - Menus File Menu 6 Menus This ch
Page 93 and 94:
6 - Menus File Menu 6.1.2 Open Free
Page 95 and 96:
6 - Menus File Menu Views Right cli
Page 97 and 98:
6 - Menus File Menu Freedom EVOware
Page 99 and 100:
6 - Menus View Menu 6.2.3 Cut / Cop
Page 101 and 102:
6 - Menus Execute Menu Freedom EVOw
Page 103 and 104:
6 - Menus Execute Menu Fig. 6-6 Set
Page 105 and 106:
6 - Menus Administrator Menu 6.4.6.
Page 107 and 108:
6 - Menus Help Menu 6.6 Help Menu T
Page 109 and 110:
6 - Menus Freedom EVOware Toolbar R
Page 111 and 112:
6 - Menus Freedom EVOware Toolbar D
Page 113 and 114:
7 - Tecan User Management System 7
Page 115 and 116:
7 - Tecan User Management System Fr
Page 117 and 118:
7 - Tecan User Management System Sp
Page 119 and 120:
8 - Configuration Tool Toolbar Butt
Page 121 and 122:
8 - Configuration Tool Backing Up a
Page 123 and 124:
8 - Configuration Tool General Sett
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
8 - Configuration Tool Device Setti
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
8 - Configuration Tool Device Drive
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
9 - Specifying Your Instrument Setu
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Page 315 and 316:
Page 317 and 318:
Page 319 and 320:
10 - Configuring Liquid Classes Liq
Page 321 and 322:
Page 323 and 324:
Page 325 and 326:
10 - Configuring Liquid Classes LiH
Page 327 and 328:
Page 329 and 330:
Page 331 and 332:
Page 333 and 334:
Page 335 and 336:
10 - Configuring Liquid Classes MCA
Page 337 and 338:
Page 339 and 340:
Page 341 and 342:
Page 343 and 344:
Page 345 and 346:
Page 347 and 348:
Page 349 and 350:
Page 351 and 352:
10 - Configuring Liquid Classes Te-
Page 353 and 354:
Page 355 and 356:
Page 357 and 358:
Page 359 and 360:
Page 361 and 362:
10 - Configuring Liquid Classes Ove
Page 363 and 364:
Page 365 and 366:
Page 367 and 368:
Page 369 and 370:
Page 371 and 372:
11 - Getting Started - Setting Up a
Page 373 and 374:
Page 375 and 376:
Page 377 and 378:
Page 379 and 380:
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
Page 387 and 388:
Page 389 and 390:
Page 391 and 392:
12 - Running Scripts and Processes
Page 393 and 394:
Page 395 and 396:
Page 397 and 398:
Page 399 and 400:
Page 401 and 402:
Page 403 and 404:
Page 405 and 406:
Page 407 and 408:
Page 409 and 410:
13 - Overview of Freedom EVOware Co
Page 411 and 412:
Page 413 and 414:
Page 415 and 416:
Page 417 and 418:
Page 419 and 420:
Page 421 and 422:
Page 423 and 424:
Page 425 and 426:
Page 427 and 428:
Page 429 and 430:
Page 431 and 432:
Page 433 and 434:
Page 435 and 436:
Page 437 and 438:
Page 439 and 440:
Page 441 and 442:
Page 443 and 444:
Page 445 and 446:
14 - Advanced Programming Features
Page 447 and 448:
Page 449 and 450:
Page 451 and 452:
Page 453 and 454:
Page 455 and 456:
Page 457 and 458:
Page 459 and 460:
Page 461 and 462:
Page 463 and 464:
Page 465 and 466:
Page 467 and 468:
Page 469 and 470:
15 - Script Commands Aspirate Comma
Page 471 and 472:
15 - Script Commands Dispense Comma
Page 473 and 474:
15 - Script Commands Mix Command Lo
Page 475 and 476:
15 - Script Commands Mix Command ad
Page 477 and 478:
15 - Script Commands Wash Tips Comm
Page 479 and 480:
15 - Script Commands Periodic Wash
Page 481 and 482:
15 - Script Commands Get DITIs Comm
Page 483 and 484:
15 - Script Commands Set DITI Posit
Page 485 and 486:
15 - Script Commands Pick Up DITIs
Page 487 and 488:
15 - Script Commands Pickup ZipTip
Page 489 and 490:
15 - Script Commands Detect Liquid
Page 491 and 492:
15 - Script Commands Te-Fill Aspira
Page 493 and 494:
15 - Script Commands Te-Fill Dispen
Page 495 and 496:
15 - Script Commands Te-Fill Prime
Page 497 and 498:
15 - Script Commands Activate PMP C
Page 499 and 500:
15 - Script Commands Tip Alignment
Page 501 and 502:
15 - Script Commands Move LiHa Comm
Page 503 and 504:
15 - Script Commands Waste Command
Page 505 and 506:
15 - Script Commands Worklist Comma
Page 507 and 508:
Page 509 and 510:
Page 511 and 512:
Page 513 and 514:
Page 515 and 516:
15 - Script Commands Worklist Impor
Page 517 and 518:
15 - Script Commands Export Data Co
Page 519 and 520:
Page 521 and 522:
Page 523 and 524:
Page 525 and 526:
15 - Script Commands Manual Tip Ali
Page 527 and 528:
15 - Script Commands Copy Plate Wiz
Page 529 and 530:
15 - Script Commands Copy Plate Wiz
Page 531 and 532:
15 - Script Commands Replicates Wiz
Page 533 and 534:
Page 535 and 536:
Page 537 and 538:
15 - Script Commands Serial Dilutio
Page 539 and 540:
Page 541 and 542:
Page 543 and 544:
Page 545 and 546:
15 - Script Commands Merge Plates W
Page 547 and 548:
Page 549 and 550:
Page 551 and 552:
Page 553 and 554:
15 - Script Commands Transfer Wizar
Page 555 and 556:
Page 557 and 558:
Page 559 and 560:
15 - Script Commands MCA Merge Plat
Page 561 and 562:
15 - Script Commands MCA Merge Plat
Page 563 and 564:
15 - Script Commands Start Timer Co
Page 565 and 566:
15 - Script Commands Comment Comman
Page 567 and 568:
15 - Script Commands User Prompt Co
Page 569 and 570:
15 - Script Commands Set Variable C
Page 571 and 572:
15 - Script Commands Import Variabl
Page 573 and 574:
15 - Script Commands Import Variabl
Page 575 and 576:
15 - Script Commands Export Variabl
Page 577 and 578:
15 - Script Commands Condition Comm
Page 579 and 580:
15 - Script Commands If - Then Comm
Page 581 and 582:
15 - Script Commands Sub-Routine Co
Page 583 and 584:
15 - Script Commands Execute VB Scr
Page 585 and 586:
15 - Script Commands Start Script C
Page 587 and 588:
15 - Script Commands Resume Command
Page 589 and 590:
15 - Script Commands Te-MO Commands
Page 591 and 592:
Page 593 and 594:
Page 595 and 596:
Page 597 and 598:
Page 599 and 600:
Page 601 and 602:
Page 603 and 604:
Page 605 and 606:
Page 607 and 608:
Page 609 and 610:
15 - Script Commands RoMa Vector Co
Page 611 and 612:
15 - Script Commands Transfer Labwa
Page 613 and 614:
15 - Script Commands Move PnP Comma
Page 615 and 616:
15 - Script Commands PnP Vector Com
Page 617 and 618:
15 - Script Commands Transfer Tube
Page 619 and 620:
15 - Script Commands PosID Command
Page 621 and 622:
15 - Script Commands PosID Command
Page 623 and 624:
15 - Script Commands Balance Comman
Page 625 and 626:
15 - Script Commands Balance Send C
Page 627 and 628:
15 - Script Commands MCA96 Commands
Page 629 and 630:
Page 631 and 632:
Page 633 and 634:
Page 635 and 636:
Page 637 and 638:
Page 639 and 640:
Page 641 and 642:
Page 643 and 644:
Page 645 and 646:
Page 647 and 648:
15 - Script Commands MCA384 Command
Page 649 and 650:
Page 651 and 652:
Page 653 and 654:
Page 655 and 656:
Page 657 and 658:
Page 659 and 660:
Page 661 and 662:
Page 663 and 664:
Page 665 and 666:
Page 667 and 668:
Page 669 and 670:
Page 671 and 672:
Page 673 and 674:
15 - Script Commands CNS SendNotifi
Page 675 and 676:
16 - Device Commands Service Functi
Page 677 and 678:
16 - Device Commands Commands for t
Page 679 and 680:
Page 681 and 682:
Page 683 and 684:
Page 685 and 686:
Page 687 and 688:
Page 689 and 690:
Page 691 and 692:
Page 693 and 694:
Page 695 and 696:
Page 697 and 698:
Page 699 and 700:
Page 701 and 702:
Page 703 and 704:
Page 705 and 706:
Page 707 and 708:
Page 709 and 710:
Page 711 and 712:
Page 713 and 714:
Page 715 and 716:
Page 717 and 718:
Page 719 and 720:
Page 721 and 722:
Page 723 and 724:
Page 725 and 726:
Page 727 and 728:
Page 729 and 730:
Page 731 and 732:
Page 733 and 734:
Page 735 and 736:
Page 737 and 738:
Page 739 and 740:
Page 741 and 742: 16 - Device Commands Commands for t
Page 791: 16 - Device Commands Commands for t
Page 803 and 804: 16 - Device Commands Specifying Out
Page 805 and 806: 17 - Special Features, Example Scri
Page 843 and 844:
17 - Special Features, Example Scri
Page 845 and 846:
17 - Special Features, Example Scri
Page 847 and 848:
18 - Error Handling Error Dialogs 1
Page 849 and 850:
18 - Error Handling Error Dialogs D
Page 851 and 852:
18 - Error Handling Error Dialogs F
Page 853 and 854:
Page 855 and 856:
Page 857 and 858:
18 - Error Handling Error Dialogs A
Page 859 and 860:
Page 861 and 862:
18 - Error Handling Error Dialogs N
Page 863 and 864:
Page 865 and 866:
18 - Error Handling Error Dialogs S
Page 867 and 868:
18 - Error Handling Error Dialogs S
Page 869 and 870:
Page 871 and 872:
18 - Error Handling Error Dialogs I
Page 873 and 874:
Page 875 and 876:
18 - Error Handling Editing Message
Page 877 and 878:
18 - Error Handling Editing Message
Page 879 and 880:
18 - Error Handling List of Error M
Page 881 and 882:
Page 883 and 884:
Page 885 and 886:
Page 887 and 888:
Page 889 and 890:
Page 891 and 892:
Page 893 and 894:
Page 895 and 896:
Page 897 and 898:
Page 899 and 900:
Page 901 and 902:
Page 903 and 904:
Page 905 and 906:
Page 907 and 908:
Page 909 and 910:
Page 911 and 912:
Page 913 and 914:
Page 915 and 916:
19 - Customer Support 19 Customer S
Page 917 and 918:
19 - Customer Support USA (Componen
Page 919 and 920:
A - Appendix A Overview of the Log
Page 921 and 922:
Page 923 and 924:
Page 925 and 926:
Page 927 and 928:
Page 929 and 930:
A - Appendix A Structure of the Bar
Page 931 and 932:
Page 933 and 934:
Page 935 and 936:
A - Appendix A Parameters in the Ev
Page 937 and 938:
Page 939 and 940:
Page 941 and 942:
Page 943 and 944:
A - Appendix A Freedom EVOware Dire
Page 945 and 946:
A - Appendix A Freedom EVOware Dire
Page 947 and 948:
A - Appendix A Command Line Paramet
Page 949 and 950:
A - Appendix A Frequently Asked Que
Page 951 and 952:
A - Appendix A System Tools for Fre
Page 953 and 954:
Page 955 and 956:
Page 957 and 958:
Page 959 and 960:
Page 961 and 962:
Page 963 and 964:
Page 965 and 966:
Page 967 and 968:
Page 969 and 970:
Page 971 and 972:
Page 973 and 974:
Page 975 and 976:
Page 977 and 978:
Page 979 and 980:
Page 981 and 982:
Page 983 and 984:
Page 985 and 986:
Page 987 and 988:
Page 989 and 990:
Page 991 and 992:
A - Appendix A LogViewer Tool Fig.
Page 993 and 994:
A - Appendix A LogViewer Tool Docki
Page 995 and 996:
A - Appendix A LogViewer Tool Filte
Page 997 and 998:
A - Appendix A LogViewer Tool A.10.
Page 999 and 1000:
A - Appendix A Tecan Driver Install
Page 1001 and 1002:
A - Appendix A Common Notification
Page 1003 and 1004:
Page 1005 and 1006:
Page 1007 and 1008:
Page 1009 and 1010:
A - Appendix A ASTM Interface Modul
Page 1011 and 1012:
Page 1013 and 1014:
Page 1015 and 1016:
Page 1017 and 1018:
Page 1019 and 1020:
Page 1021 and 1022:
A - Appendix A Configuring and Usin
Page 1023 and 1024:
Page 1025 and 1026:
Page 1027 and 1028:
Page 1029 and 1030:
Page 1031 and 1032:
Page 1033 and 1034:
Page 1035 and 1036:
Page 1037 and 1038:
A - Appendix A Advanced Worklist Co
Page 1039 and 1040:
Page 1041 and 1042:
Page 1043 and 1044:
Page 1045 and 1046:
Page 1047 and 1048:
Page 1049 and 1050:
Page 1051 and 1052:
Page 1053 and 1054:
Page 1055 and 1056:
Page 1057 and 1058:
Page 1059 and 1060:
Page 1061 and 1062:
Page 1063 and 1064:
Page 1065 and 1066:
Page 1067 and 1068:
Page 1069 and 1070:
Page 1071 and 1072:
Page 1073 and 1074:
Page 1075 and 1076:
Page 1077 and 1078:
Page 1079 and 1080:
Page 1081 and 1082:
Page 1083 and 1084:
Page 1085 and 1086:
Page 1087 and 1088:
Page 1089 and 1090:
Page 1091 and 1092:
Page 1093 and 1094:
Page 1095 and 1096:
Page 1097 and 1098:
B - Appendix B - FDA 21 CFR Part 11
Page 1099 and 1100:
Page 1101 and 1102:
Page 1103 and 1104:
Page 1105 and 1106:
Page 1107 and 1108:
Page 1109 and 1110:
Page 1111 and 1112:
Page 1113 and 1114:
Page 1115 and 1116:
Page 1117 and 1118:
Page 1119 and 1120:
Page 1121 and 1122:
Page 1123 and 1124:
Page 1125 and 1126:
Page 1127 and 1128:
Page 1129 and 1130:
C - Validation of Freedom EVOware A
Page 1131 and 1132:
Page 1133 and 1134:
Page 1135 and 1136:
D - Glossary Glossary of Terms and
Page 1137 and 1138:
Page 1139 and 1140:
Page 1141 and 1142:
Page 1143 and 1144:
Page 1145 and 1146:
Page 1147 and 1148:
Page 1149 and 1150:
Page 1151 and 1152:
Page 1153 and 1154:
Page 1155 and 1156:
Page 1157 and 1158:
Page 1159 and 1160:
Page 1161 and 1162:
D - Glossary Important GUI features
Page 1163 and 1164:
D - Glossary Important GUI features
Page 1165 and 1166:
IX - Index IX Index Purpose of This
Page 1167 and 1168:
IX - Index D-18 Centrifuge (overvie
Page 1169 and 1170:
IX - Index Notification . . . . . .
Page 1171 and 1172:
IX - Index for the MCA96 . . . . .
Page 1173 and 1174:
IX - Index LICOS (overview) . . . .
Page 1175 and 1176:
IX - Index R Rack (overview) . . .
Page 1177 and 1178:
IX - Index Te-Shake (overview) . .
show all

Software Manual Freedom EVOware Standard 2.3 Freedom ...

Create successful ePaper yourself

Delete template?

Save as template?