Software Manual Freedom EVOware Standard 2.3 Freedom ...

13 - Overview of Freedom EVOware Commands
Overview of Script Commands
13.1.2 Wizards, Overview
The following table lists advanced commands which are configured using wizards.
To use these commands in Freedom EVOware Plus, add the device command
“Liquid Handling Arm - Pipette” to your process; this opens the Script Editor (see
16.13.2, 16-47).
Tab. 13-2 Wizards
Copy Plate - The Copy Plate wizard creates a set of script commands which make
identical copies of the source plate on one or more destination plates. You can copy
the whole plate or a rectangular selection of wells. See 15.28 “Copy Plate Wizard”,
15-59.
Replicates - The Replicates wizard creates a set of script commands which make
one or more repetitions (copies) of selected wells on the source plate on one or more
destination plates. All of the destination plates will be identical. You can only create
horizontal replicates. See 15.29 “Replicates Wizard”, 15-63.
Serial Dilution - The Serial Dilution wizard creates a set of script commands which
perform a serial dilution in two or more steps. Each dilution step has the same dilution
factor. See 15.30 “Serial Dilution Wizard”, 15-69.
Merge Plates - The Merge Plates wizard creates a set of script commands which
make a destination plate (e.g. a 384 well plate) by merging together wells from one or
more source plates (e.g. four 96 well plates). See 15.31 “Merge Plates Wizard”, 15-
77.
Transfer - The Transfer wizard creates a set of script commands which aspirate liquid
from specified wells on the source plate and transfer it to destination positions See
15.32 “Transfer Wizard”, 15-85.
MCA Merge Plate - The MCA Merge Plate wizard creates a set of script commands
for the MCA96 which merge four 96-well microplates into one 384-well microplate.
See 15.33 “MCA Merge Plate Wizard”, 15-90.
13.1.3 Programming Commands, Overview
The following table lists the script programming commands. To use these
commands in Freedom EVOware Plus, add the device command “Liquid Handling
Arm - Pipette” to your process; this opens the Script Editor (see 16.13.2, 16-47).
13 - 4 Freedom EVOware Software Manual, 393172, en, V2.3