Software Manual Freedom EVOware Standard 2.3 Freedom ...

16 - Device Commands
Commands for the GENios Reader
16.8.6 GENios Reader - Measure Command
The Measure command performs a measurement procedure using external
software. For a detailed description of the parameters of this command please
consult the documentation for RdrOLE and XFluor4.
Execution parameters
The RdrOLE reader interface software prompts you to specify the measurement
parameters when you add this command to your script or process. Refer to the
RdrOLE online help and manual for more information.
Note: RdrOLE must be configured to connect to the chosen reader. In Freedom
EVOware’s offline mode, you must start RdrOLE and choose the reader manually.
After making your entries in the Measurement Parameters dialog box and clicking
Ok, the Output dialog box is shown where you must specify the name of the
output file for the measurements. Alternatively, click Browse and choose an
existing file. A default file name will be suggested automatically:
Fig. 16-28 Specifying the output file of the GENios Reader Measure command
See 16.42 “Specifying Output Filenames for Reader Data”, 16-128 for a
description of the placeholders which can be used to generate reader data file
names.
To view or edit the execution parameters again later, right-click on the process
step in the Process Editor and choose Edit Parameters in the context menu.
Objects
The Measure command operates on an object of type Sample or a derived type
with default name MP.
Pre-actions and post-actions
The labware is brought to the GENios location with a RoMa MoveObject
command and the door of the reader is opened with the Open command. After the
measurement, the labware is brought back to its Base location with another RoMa
MoveObject command and the door is closed with the Close command.
16.8.7 GENios Reader - Multilabel Command
The Multilabel command performs up to four consecutive measurement steps on
the same labware using external software. The labware does not have to leave
the reader in between measurements. Multi labeling allows different components
(labelled with different fluorophores) to be detected in one operation.
16 - 34 Freedom EVOware Software Manual, 393172, en, V2.3