Specifications - State of Delaware

SECTION 014500 - QUALITY CONTROL: continued
Qualification/Experience
in Area of Responsibility
Roofing Manufacturer's
Technical
Representative/five years
minimum
Mechanical Inspector,
International Code Council
(ICC) Certified/five years
minimum
Area of Responsibility
Installation and testing of
roofing systems, SECTION
075323 - ETHYLENE-
PROPYLENE-DIENE-
MONOMER ROOFING
Installation and testing of
boilers, SECTION
235249.0020 - STEAM
BOILERS AND
EQUIPMENT (500,000 -
18,000,000 BTU/HR)
Frequency
Full time
Minimum three times
a week during
installation and full
time during testing
Erection of structural steel,
SECTION 051200 -
STRUCTURAL STEEL
Minimum twice a
week
1.06 QUALITY CONTROL (QC) PLAN:
A. Construction Quality Control (QC) Plan:
1. Requirements:
a. Provide, for acceptance by the Contracting Officer, a Construction QC Plan
submitted in a three-ring binder that includes a table of contents, with major
sections identified with tabs, with pages numbered sequentially, and that documents
the proposed methods and responsibilities for accomplishing commissioning
activities during the construction of the project:
(1) QC Organization:
(a) A chart showing the QC organizational structure.
(2) Names and Qualifications:
(a)
Names and qualifications, in resume format, for each person in the
QC organization. Include the CQM for Contractors course
certifications for the QC Manager and Alternate QC Manager as
required by the paragraphs entitled "Construction Quality
Management Training" and "Alternate QC Manager Duties and
Qualifications".
(3) Duties, Responsibility and Authority of QC Personnel:
(a) Duties, responsibilities, and authorities of each person in the
QC organization.
(4) Outside Organizations:
(a)
A listing of outside organizations, such as architectural and consulting
engineering firms, that will be employed by the Contractor and a
description of the services these firms will provide.
DEAN014500.DOC 014500-5