Specifications - State of Delaware

SECTION 096519 - RESILIENT TILE FLOORING
PART 1 - GENERAL
1.01 RELATED DOCUMENTS:
A. Drawings and general provisions of the Contract, including General and Supplementary
Conditions and DIVISION 01 Specification Sections, apply to this Section.
1.02 SUMMARY:
A. This Section Includes:
1. Vinyl composition floor tile.
B. Related Sections:
1. DIVISION 01 Section "Sustainable Design Requirements" for LEED ® related
requirements for recycled content materials and local/regionally manufactured and
sourced materials.
2. DIVISION 09 Section "Resilient Base and Accessories" for resilient base, reducer strips,
and other accessories installed with resilient floor coverings.
1.03 REFERENCES:
A. ASTM International:
1. ASTM C109/C109M-02 - Test Method for Compressive Strength of Hydraulic Cement
Mortars.
2. ASTM D695-02a - Test Method for Compressive Properties of Rigid Plastics.
3. ASTM D2240-04 - Test Method for Rubber Property Durometer Hardness.
4. ASTM E648-03 - Test Method for Critical Radiant Flux of Floor-Covering Systems
Using a Radiant Heat Energy Source.
5. ASTM F510-93 (Reapproved 2004) - Test Method for Resistance to Abrasion of
Resilient Floor Coverings Using an Abrader with a Grit Feed Meter.
6. ASTM F710-05 - Practice for Preparing Concrete Floors to Receive Resilient Flooring.
7. ASTM F970-00 - Test Method for Static Load Limit.
8. ASTM F1066-04 - Specification for Vinyl Composition Floor Tile.
9. ASTM F1869-04 - Test Method for Measuring Moisture Vapor Emission Rate of
Concrete Subfloor Using Anhydrous Calcium Chloride.
10. ASTM F2170-02 - Test Method for Determining Relative Humidity in Concrete Floor
Slabs Using in Situ Probes.
B. Code of Federal Regulations:
1. 40 CFR 59, Subpart D-2003 - National Volatile Organic Compound Emission Standards
for Architectural Coatings.
C. NFPA:
1. NFPA 253-2000 - Method of Test for Critical Radiant Flux of Floor Covering Systems
Using a Radiant Heat Energy Source.
1.04 SUBMITTALS:
A. Product Data: For each type of product indicated.
B. LEED Submittals:
1. Product Data for Credit IEQ 4.1: For adhesives, documentation including printed
statement of VOC content.
2. Product Data for Credit IEQ 4.3: For adhesives and chemical-bonding compounds,
documentation including printed statement of VOC content.
DEAN096519.DOC 096519-1