Specifications - State of Delaware

DIVISION 06 - WOOD AND PLASTICS
SECTION 061000 - ROUGH CARPENTRY
PART 1 - GENERAL
1.01 RELATED DOCUMENTS:
A. Drawings and general provisions of the Contract, including General and Supplementary
Conditions and DIVISION 01 Specification Sections, apply to this Section.
1.02 SUMMARY:
A. Section Includes:
1. Wood blocking, cants, and nailers.
2. Wood furring and grounds.
3. Wood sleepers.
4. Plywood backing panels.
1.03 REFERENCES:
A. American Forest & Paper Association:
1. WCD 1-2001 - Details for Conventional Wood Frame Construction. (Available in PDF
at www.awc.org).
B. American Wood-Preservers' Association:
1. AWPA M4-2001 - Care of Preservative-Treated Wood Products.
2. AWPA U1-2007 - Use Category System - User Specification for Treated Wood.
3. APA - The Engineered Wood Association.
C. ASME International:
1. ASME B18.2.1-1996 - Square and Hex Bolts and Screws (Inch Series).
2. ASME B18.2.3.8M-1981 (Revised 1999) - Metric Hex Lag Screws.
3. ASME B18.6.1-1981 (Revised 1997) - Wood Screws (Inch Series).
D. ASTM International:
1. ASTM A153-05 - Specification for Zinc-Coating (Hot-Dip) of Iron and Steel Hardware.
2. ASTM A307-07b - Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile
Strength.
3. ASTM A563-07a - Specification for Carbon and Alloy Steel Nuts.
4. ASTM A653 -07 - Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron
Alloy-Coated (Galvannealed) by the Hot-Dip Process.
5. ASTM B633-07 - Specification for Electrodeposited Coatings of Zinc on Iron and Steel.
6. ASTM D5664-02 - Test Method for Evaluating the Effects of Fire-Retardant Treatments
and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber.
7. ASTM D6841-03 - Practice for Calculating Design Value Treatment Adjustment Factors
for Fire-Retardant-Treated Lumber.
8. ASTM E84-08a - Test Method for Surface-Burning Characteristics of Building Materials.
9. ASTM E488-96 (Reapproved 2003) - Test Methods for Strength of Anchors in Concrete
and Masonry Elements.
10. ASTM F593-02 - Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs.
11. ASTM F594-02 - Specification for Stainless Steel Nuts.
12. ASTM F1667-05 - Specification for Driven Fasteners - Nails, Spikes, and Staples.
E. Code of Federal Regulations:
1. 40 CFR, Part 59, Subpart D-2002 - National Volatile Organic Compound Emission
Standards for Architectural Coatings.
DEAN061000.DOC 061000-1