Specifications - State of Delaware

SECTION 102800 - TOILET, BATH, AND LAUNDRY ACCESSORIES: continued
G. Chrome Plating: ASTM B456, Service Condition Number SC 2 (moderate service).
H. Mirrors: ASTM C1503, Mirror Glazing Quality, clear-glass mirrors, nominal 6.0 mm thick.
I. ABS Plastic: Acrylonitrile-butadiene-styrene resin formulation.
2.02 PUBLIC-USE WASHROOM ACCESSORIES:
A. Manufacturers: Subject to compliance with requirements, provide products by one of the
following:
1. A & J Washroom Accessories, Inc.
2. American Specialties, Inc.
3. Bobrick Washroom Equipment, Inc.
4. Bradley Corporation.
5. GAMCO Specialty Accessories; a division of Bobrick Washroom Equipment, Inc.
6. Tubular Specialties Manufacturing, Inc.
7. Or approved equals.
B. Toilet Tissue (Roll) Dispenser (TA-1):
1. Description: Double-roll dispenser with shelf.
2. Mounting: Surface mounted.
3. Operation: Noncontrol delivery with standard spindle.
4. Capacity: Designed for 4-1/2- or 5-inch diameter tissue rolls.
5. Material and Finish: Stainless steel, No. 4 finish (satin).
C. Paper Towel (Folded) Dispenser (TA-2):
1. Mounting: Surface mounted.
2. Minimum Capacity: 400 C-fold or 525 multifold towels.
3. Material and Finish: Stainless steel, No. 4 finish (satin).
4. Lockset: Tumbler type.
5. Refill Indicators: Pierced slots at sides or front.
D. Liquid-Soap Dispenser (TA-3):
1. Description: Designed for dispensing soap in liquid or lotion form.
2. Mounting: Vertically -oriented, surface mounted.
3. Capacity: 20 ounces.
4. Materials:
5. Lockset: Tumbler type.
6. Refill Indicator: Window type.
E. Seat-Cover Dispenser (TA-4):
1. Mounting: Surface mounted.
2. Minimum Capacity: 250 seat covers.
3. Exposed Material and Finish: Stainless steel, No. 4 finish (satin).
4. Lockset: Tumbler type.
F. Grab Bars (TA-5):
1. Mounting: Flanges with concealed fasteners.
2. Material: Stainless steel, 0.05 inch thick.
a. Finish: Smooth, No. 4 finish (satin) on ends and slip-resistant texture in grip area.
3. Outside Diameter: 1-1/4 inches.
4. Configuration and Length: As indicated on Drawings.
G. Waste Receptacle (TA-6):
1. Open top, freestanding.
2. Minimum capacity.
3. Material: Stainless steel, No. 4 finish (satin).
4. Liner: Reusable vinyl liner.
DEAN102800.DOC 102800-3