Specifications - State of Delaware

SECTION 089000 - LOUVERS AND VENTS
PART 1 - GENERAL
1.01 RELATED DOCUMENTS:
A. Drawings and general provisions of the Contract, including General and Supplementary
Conditions and DIVISION 01 Specification Sections, apply to this Section.
B. DIVISION 01, Section "Sustainable Design Requirements" for LEED ® related requirements
for recycled content materials and local/regionally manufactured and sourced materials.
C. DIVISION 07, Section "Joint Sealants" apply to this Section.
1.02 SUMMARY:
A. Section Includes:
1. Fixed, extruded-aluminum louvers.
1.03 REFERENCES:
A. Air Movement and Control Association International, Inc.:
1. AMCA 500-L-1999 - Test Methods for Louvers, Dampers.
2. AMCA 501-2003 - Application Manual for Air Louvers.
B. American Architectural Manufacturers Association:
1. AAMA 611-1998 - Voluntary Specification for Anodized Architectural Aluminum.
2. AAMA 2603-2002 - Voluntary Specification, Performance Requirements and Test
Procedures for Pigmented Organic Coatings on Aluminum Extrusions and Panels.
3. AAMA 2604-2002 - Voluntary Specification, Performance Requirements and Test
Procedures for High Performing Organic Coatings on Aluminum Extrusions and Panels.
4. AAMA 2605-2002 - Voluntary Specification, Performance Requirements and Test
Procedures for Superior Performing Organic Coatings on Aluminum Extrusions and
Panels.
C. American Welding Society:
1. AWS D1.2/D1.2M-2003 - Structural Welding Code - Aluminum.
2. AWS D1.3-1998 - Structural Welding Code - Sheet Steel.
D. ASTM International:
1. ASTM A240/A240M-04a - Specification for Chromium and Chromium-Nickel Stainless
Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications.
2. ASTM A653/A653M-04a - Specification for Steel Sheet, Zinc-Coated (Galvanized) or
Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process.
3. ASTM A780-01 - Practice for Repair of Damaged and Uncoated Areas of Hot-Dip
Galvanized Coatings.
4. ASTM B26/B26M-03 - Specification for Aluminum-Alloy Sand Castings.
5. ASTM B209-04 - Specification for Aluminum and Aluminum-Alloy Sheet and Plate.
6. ASTM B209M-04 - Specification for Aluminum and Aluminum-Alloy Sheet and Plate
[Metric].
7. ASTM B221-04a - Specification for Aluminum and Aluminum-Alloy Extruded Bars,
Rods, Wire, Profiles and Tubes.
8. ASTM D1187-97 (Reapproved 2002) - Specification for Asphalt-Base Emulsions for Use
as Protective Coatings for Metal.
9. ASTM E413-04 - Classification for Rating Sound Insulation.
10. ASTM E488-96 (Reapproved 2003) - Test Methods for Strength of Anchors in Concrete
and Masonry Elements.
11. ASTM E1332-90 (Reapproved 2003) - Classification for Determination of Outdoor-
Indoor Transmission Class.
DEAN089000.DOC 089000-1