Specifications - State of Delaware

SECTION 224000 - PLUMBING FIXTURES
PART 1 - GENERAL
1.01 SUMMARY:
A. This Section includes the following conventional plumbing fixtures and related components:
1. Faucets for lavatories and sinks.
2. Flushometers.
3. Toilet seats.
4. Protective shielding guards.
5. Fixture supports.
6. Disposers.
7. Water closets.
8. Urinals.
9. Lavatories.
10. Commercial sinks.
11. Service basins.
B. Related Work Specified Elsewhere:
1. DIVISION 10 for toilet and bath accessories.
2. SECTION 221119 - DOMESTIC WATER PIPING SPECIALTIES for backflow
preventers, hose bibbs and wall hydrants.
3. SECTION 221319 - SANITARY WASTE PIPING SPECIALITIES for floor drains and
cleanouts.
4. SECTION 224700 - DRINKING FOUNTAINS AND WATER COOLERS.
1.02 REFERENCES:
A. Applicable Standards (Latest Edition):
1. American National Standards Institute (ANSI):
a. Z124.5 - Plastic Toilet (Water Closet) Seats.
2. American Society of Sanitary Engineering (ASSE):
a. 1001 - Pipe Applied Atmospheric Type Vacuum Breakers.
b. 1008 - Household Food Waste Disposer Units.
c. 1011 - Hose Connection Vacuum Breakers.
d. 1037 - Pressurized Flushing Devices (Flushometers) for Plumbing Fixtures.
3. ASME International (ASME):
a. A112.6.1M - Floor-Affixed Supports for Off-the-Floor Plumbing Fixtures for
Public Use.
b. A112.18.1 - Plumbing Fixture Fittings.
c. A112.18.2 - Plumbing Fixture Waste Fittings.
d. A112.18.3M - Performance Requirements for Backflow Protection Devices and
Systems in Plumbing Fixture Fittings.
e. A112.18.6 - Flexible Water Connectors.
f. A112.19.1M - Enameled Cast-Iron Plumbing Fixtures.
g. A112.19.2M - Vitreous China Plumbing Fixtures.
h. A112.19.3 - Stainless Steel Plumbing Fixtures (Designed for Residential Use).
i. A112.19.4M - Porcelain Enameled Formed Steel Plumbing Fixtures.
j. A112.19.5 - Trim for Water-Closet Bowls, Tanks and Urinals.
k. B1.20.1 - Pipe Threads, General Purpose (Inch).
l. B1.20.7 - Hose Coupling Screw Threads (Inch).
DEAN224000.DOC 224000-1