Specifications - State of Delaware

SECTION 265610 - EXTERIOR LIGHTING FIXTURES: continued
o. Wide-Light Corp.
2. High-Intensity Discharge Ballasts:
a. Advance Transformer Co.
b. Valmont.
c. Holophane Div; Johns-Manville Corp.
d. Jefferson Electric Co.
e. Magne-Tek.
f. McGraw-Edison Co.
g. Sola Electric Div; General Signal Corp.
h. Wide-Lite Corp.
3. Lamps:
a. General Electric.
b. Osram Sylvania.
c. Phillips.
d. Venture.
4. Solar Light Fixtures:
a. SOL.
2.02 EXTERIOR LIGHTING FIXTURES:
A. General: Provide lighting fixtures of sizes, types, and ratings indicated; complete with, but not
limited to, housings, high power factor ballasts, energy efficient ballasts, lamps, starters, and
wiring. All equipment and materials shall bear the UL label.
B. High-Intensity Discharge Lamp Ballasts: High power factor HID lamp ballasts rated -20ºF, of
ratings, types, and makes as recommended by lamp manufacturer, which properly mates and
matches lamps to electrical supply by providing appropriate voltages and impedances for
which lamps are designed. Design ballasts to operate lamp within the lamp's power trapezoid
requirements.
C. Lamps:
1. Clear metal halide lamps in wattages indicated.
2. Fluorescent lamps in wattages required, with lamp color as indicated on the light fixture
schedule.
D. Provide integral 2-50 footcandle adjustable photocell control when indicated. Photo control
shall have internal 2-minute time delay.
2.03 EXTERIOR LIGHTING FIXTURE TYPES:
A. General: Various fixture types are indicated on the fixture schedule on the drawings. Fixtures
shall comply with the minimum requirements as stated on the schedule.
2.04 EXTRA STOCK:
A. Furnish stock or replacement lamps amounting to 15% of the total number of lamps (but not
less than four lamps in each case) of each type and size lamp used on the Project. Deliver
replacement lamps as directed to Contracting Officer's storage space and obtain a receipt.
PART 3 - EXECUTION
3.01 EXAMINATION:
DEAN265610.DOC 265610-3