Specifications - State of Delaware

SECTION 064023 - INTERIOR ARCHITECTURAL WOODWORK: continued
G. Forest Stewardship Council:
1. FSC STD-01-001-2004 - FSC Principles and Criteria for Forest Stewardship (available in
PDF at www.fsc.org).
H. Hardwood Plywood & Veneer Association:
1. HPVA HP-1-2004 - American National Standard for Hardwood and Decorative Plywood
(ANSI).
I. National Electrical Manufacturers Association:
1. NEMA LD 3-2005 - High Pressure Decorative Laminates (available in PDF at
www.nema.org).
J. National Hardwood Lumber Association:
1. Rules for the Measurement and Inspection of Hardwood & Cypress, 2003. (Available in
PDF at www.natlhardwood.org).
K. National Lumber Grades Authority:
1. Standard Grading Rules for Canadian Lumber, 2007.
L. Northeastern Lumber Manufacturers' Association:
1. Standard Grading Rules for Northeastern Lumber, 2006. (Available in PDF at
www.nelma.org).
M. Southern Pine Inspection Bureau:
1. Standard Grading Rules for Southern Pine Lumber, 2002.
N. U.S. Department of Commerce, National Institute of Standards and Technology:
1. DOC PS 1-1995 - Construction and Industrial Plywood (available in PDF at
www.apawood.org and www.nist.gov).
2. DOC PS 20-2005 - American Softwood Lumber Standard (available in PDF at
www.alsc.org and www.nist.gov).
O. West Coast Lumber Inspection Bureau:
1. Standard No. 17-1996 - Grading Rules for West Coast Lumber.
P. Western Wood Products Association:
1. Western Lumber Grading Rules, 2005.
Q. Wood Molding & Millwork Producers Association:
1. WMMPA HWM 1-1991 - HWM/Series Hardwood Moulding Patterns.
1.04 DEFINITIONS:
A. Interior architectural woodwork includes wood furring, blocking, shims, and hanging strips for
installing woodwork items unless concealed within other construction before woodwork
installation.
1.05 SUBMITTALS:
A. Product Data: For each type of product indicated, including cabinet hardware and accessories
and finishing materials and processes.
B. Product Data: For panel products high-pressure decorative laminate adhesive for bonding
plastic laminate solid-surfacing material cabinet hardware and accessories and finishing
materials and processes.
1. Include data for fire-retardant treatment from chemical treatment manufacturer and
certification by treating plant that treated materials comply with requirements.
C. LEED Submittals:
1. Product Data for Credit MR 4: For products having recycled content, documentation
indicating percentages by weight of postconsumer and preconsumer recycled content.
Include statement indicating cost for each product having recycled content.
064023-2 DEAN064023.DOC