Specifications - State of Delaware

SECTION 211000 - FIRE-SUPPRESSION PIPING
PART 1 - GENERAL
DIVISION 21 - FIRE SUPPRESSION
1.01 SUMMARY:
A. This Section includes the following fire-suppression piping inside the building:
1. Wet-pipe sprinkler systems.
B. Related Work Specified Elsewhere:
1. Piping outside the building: SECTION 331100 - PRESSURE PIPING.
2. Cabinets and fire extinguishers: SECTION 104400 - FIRE PROTECTION
SPECIALTIES.
3. Alarm devices not specified in this Section: SECTION 283100 - FIRE ALARM
SYSTEMS.
4. Electric-drive fire pumps: SECTION 213113 - ELECTRIC-DRIVE, CENTRIFUGAL
FIRE PUMPS.
1.02 REFERENCES:
A. Applicable Standards (Latest Edition):
1. American Society for Testing and Materials (ASTM):
a. A53 - Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless.
b. A106 - Seamless Carbon Steel Pipe for High-Temperature Service.
c. A135 - Electric-Resistance-Welded Steel Pipe.
d. A234 - Pipe Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and
High Temperature Service.
e. A536 - Ductile Iron Castings.
f. A733 - Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe
Nipples.
g. A795 - Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless
Steel Pipe for Fire Protection Use.
h. A865 - Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or
Seamless, for Use in Steel Pipe Joints.
2. American Society of Civil Engineers (ASCE):
a. 7 - Minimum Design Loads for Buildings and Other Structures: Section 9,
Earthquake Loads.
3. American Water Works Association (AWWA):
a. C110 - Ductile-Iron and Gray-Iron Fittings, 3 Inches through 48 Inches, for Water
and Other Liquids.
b. C111 - Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings.
c. C151 - Ductile-Iron Pipe, Centrifugally Cast, for Water.
d. C606 - Grooved and Shouldered Joints.
4. ASME International (ASME):
a. B1.20.1 - Pipe Threads, General Purpose (Inch).
b. B16.1 - Cast Iron Pipe Flanges and Flanged Fittings.
c. B16.3 - Malleable Iron Threaded Fittings.
d. B16.4 - Gray Iron Threaded Fittings.
e. B16.5 - Pipe Flanges and Flanged Fittings.
f. B16.9 - Factory-Made Wrought Steel Buttwelding Fittings.
g. B16.11 - Forged Fittings, Socket Welding and Threaded.
DEAN211000.DOC 211000-1