Specifications - State of Delaware

SECTION 230700 - MECHANICAL INSULATION: continued
q. C1393 - Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation
for Pipes and Tanks.
r. D1644 - Test Methods for Nonvolatile Content of Varnishes.
s. E84 - Test Method for Surface Burning Characteristics of Building Materials.
t. E96 - Test Methods for Water Vapor Transmission of Materials.
3. Midwest Insulation Contractors Association (MICA):
a. National Commercial and Industrial Insulation Standards.
4. Military Specifications (MIL):
a. A-24179A - Adhesive, Flexible Unicellular-Plastic Thermal Insulation.
b. A-3316C - Adhesives, Fire-Resistant, Thermal Insulation.
c. C-19565C - Coating Compounds, Thermal Insulation, Fire- and Water-Resistant,
Vapor Barrier.
B. Related Work Specified Elsewhere:
1. Adhesives, sealants, mastics and grouts: SECTION 018113 - SUSTAINABLE DESIGN
REQUIREMENTS.
1.03 DEFINITIONS:
A. ASJ: All-service jacket.
B. FSK: Foil, scrim, Kraft paper.
C. PVDC: Polyvinylidene chloride.
D. SSL: Self-sealing lap.
1.04 SUBMITTALS:
A. General: Submit each item in this Article in accordance with SECTION 230500 - BASIC
MECHANICAL MATERIALS AND METHODS.
B. Product Data: For each type of product indicated, identify thermal conductivity, thickness, and
jackets (both factory and field applied, if any).
C. Shop Drawings: Show details for the following:
1. Application of protective shields, saddles, and inserts at hangers for each type of
insulation and hanger.
2. Insulation application at elbows, fittings, flanges, valves, and specialties for each type of
insulation.
3. Removable insulation at piping specialties, equipment connections, and access panels.
4. Application of field-applied jackets.
5. Application at linkages of control devices.
6. Field application for each equipment type.
7. Manufacturer's Color Charts: For products where color is specified, show the full range
of colors available for each type of finish material.
D. Installer Certificates: Signed by Contractor certifying that installers comply with requirements.
E. Material Test Reports: From a qualified testing agency acceptable to authorities having
jurisdiction indicating, interpreting, and certifying test results for compliance of insulation
materials, sealers, attachments, cements, and jackets, with requirements indicated. Include
dates of tests and test methods employed.
F. Field quality-control inspection reports.
G. LEED ® Submittals:
1. Product Data for Credit IEQc4.1: For adhesives, sealants, mastics, grouts and solvent
cements installed inside the weatherproofing barrier of the building, submit
documentation including manufacturer's printed statement (MSDS Sheet) of VOC
content of each product.
230700-2 DEAN230700.DOC