Specifications - State of Delaware

SECTION 064023 - INTERIOR ARCHITECTURAL WOODWORK
PART 1 - GENERAL
1.01 RELATED DOCUMENTS:
A. Drawings and general provisions of the Contract, including General and Supplementary
Conditions and DIVISION 01 Specification Sections, apply to this Section.
1.02 SUMMARY:
A. This Section includes the following:
1. Plastic-laminate cabinets.
2. Solid-surfacing-material countertops and window sills.
B. Related Sections include the following:
1. DIVISION 01, Section 018113.13 "Sustainable Design Requirements" for LEED ®
requirements and LEED documentation submittals pertaining to materials and products
provided on this project.
2. DIVISION 06, Section "Rough Carpentry" for wood furring, blocking, shims, and
hanging strips required for installing woodwork and concealed within other construction
before woodwork installation.
1.03 REFERENCES:
A. American National Standards Institute:
1. ANSI A135.4-2004 - Basic Hardboard.
2. ANSI A208.1-2009 - Particleboard.
3. ANSI A208.2-2009 - Medium Density Fiberboard (MDF) for Interior Applications.
B. American Wood Protection Association:
1. AWPA N1-2006 - All Millwork Products - Preservative Treatment by Nonpressure
Process.
2. AWPA U1-2007 - Use Category System - User Specification for Treated Wood.
C. ASTM International:
1. ASTM C834-05 - Specification for Latex Sealants.
2. ASTM D570-98 (Reapproved 2005) - Test Method for Water Absorption of Plastics.
3. ASTM D648-07 - Test Method for Deflection Temperature of Plastics under Flexural
Load in the Edgewise Position.
4. ASTM D2898-08 - Standard Practice for Accelerated Weathering of Fire-Retardant-
Treated Wood for Fire Testing.
5. ASTM D5572-95 (Reapproved 2005) - Specification for Adhesives Used for Finger
Joints in Nonstructural Lumber Products.
6. ASTM E84-09 - Test Method for Surface-Burning Characteristics of Building Materials.
D. Builders Hardware Manufacturers Association:
1. BHMA A156.9-2003 - Cabinet Hardware.
2. BHMA A156.16-2008 - Auxiliary Hardware.
E. California Department of Health Services:
1. Standard Practice for the Testing of Volatile Organic Emissions from Various Sources
Using Small-Scale Environmental Chambers, 2004.
F. Code of Federal Regulations:
1. 40 CFR 59, Subpart D-2002 - National Volatile Organic Compound Emission Standards
for Architectural Coatings.
DEAN064023.DOC 064023-1