Specifications - State of Delaware

SECTION 221319 - SANITARY WASTE PIPING SPECIALTIES
PART 1 - GENERAL
1.01 SUMMARY:
A. This Section includes the following sanitary drainage piping specialties:
1. Cleanouts.
2. Floor drains.
3. Miscellaneous sanitary drainage piping specialties.
4. Flashing materials.
1.02 REFERENCES:
A. Applicable Standards (latest edition):
1. ASME International (ASME):
a. A112.1.2 - Air Gaps in Plumbing Systems.
b. A112.6.3 - Floor and Trench Drains.
2. ASTM International (ASTM):
a. A74 - Cast Iron Soil Pipe and Fittings.
b. A653 - Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated
(Galvannealed) by the Hot-Dip Process.
c. B32 - Solder Metal.
d. B152 - Copper Sheet, Strip, Plate, and Rolled Bar.
e. B749 - Lead and Lead Alloy Strip, Sheet, and Plate Products.
f. C564 - Rubber Gaskets for Cast Iron Soil Pipe and Fittings.
g. D4068 - Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-
Containment Membrane.
3. National Fire Protection Association (NFPA):
a. 70 - National Electric Code.
4. NSF International (NSF):
a. 14 - Plastics Piping Components and Related Materials.
5. The Society for Protective Coatings (SSPC):
a. Paint 12 - Paint Specification No. 12: Cold-Applied Asphalt Mastic (Extra Thick
Film).
1.03 QUALITY ASSURANCE:
A. Drainage piping specialties shall bear label, stamp, or other markings of specified testing
agency.
B. Electrical Components, Devices, and Accessories: Listed and labeled as defined in NFPA 70,
Article 100, by a testing agency acceptable to authorities having jurisdiction, and marked for
intended use.
C. Comply with NSF 14 for plastic sanitary piping specialty components.
1.04 COORDINATION:
A. Coordinate size and location of roof penetrations.
1.05 SUBMITTALS:
A. Submit the following in accordance with SECTION 230500 - BASIC MECHANICAL
MATERIALS AND METHODS.
DEAN221319.DOC 221319-1