Specifications - State of Delaware

SECTION 088000 - GLAZING
PART 1 - GENERAL
1.01 RELATED DOCUMENTS:
A. Drawings and general provisions of the Contract, including General and Supplementary
Conditions and DIVISION 01 Specification Sections, apply to this Section.
1.02 SUMMARY:
A. Section includes glazing for the following products and applications, including those specified
in other Sections where glazing requirements are specified by reference to this Section:
1. Windows.
2. Doors.
3. Storefront framing.
B. Related Sections:
1. DIVISION 01, Section "Sustainable Design Requirements" for LEED ® related
requirements for recycled content materials and local/regionally manufactured and
sourced materials.
1.03 REFERENCES:
A. American Architectural Manufacturers Association:
1. AAMA 800-2005 - Voluntary Specifications and Test Methods for Sealants.
B. American National Standards Institute:
1. ANSI Z97.1-2004 - Safety Glazing Materials Used in Buildings - Safety Performance
Specifications and Methods of Test.
C. American Society of Civil Engineers/Structural Engineering Institute:
1. ASCE/SEI 7-2005 - Minimum Design Loads for Buildings and Other Structures.
D. ASTM International:
1. ASTM C509-00 - Specification for Elastomeric Cellular Preformed Gasket and Sealing
Material.
2. ASTM C542-05 - Specification for Lock-Strip Gaskets.
3. ASTM C716-00 - Specification for Installing Lock-Strip Gaskets and Infill Glazing
Materials.
4. ASTM C864-05 - Specification for Dense Elastomeric Compression Seal Gaskets,
Setting Blocks, and Spacers.
5. ASTM C920-05 - Specification for Elastomeric Joint Sealants.
6. ASTM C1021-01 - Practice for Laboratories Engaged in the Testing of Building Sealants.
7. ASTM C1036-01 - Specification for Flat Glass.
8. ASTM C1048-04 - Specification for Heat-Treated Flat Glass - Kind HS, Kind FT Coated
and Uncoated Glass.
9. ASTM C1087-00 - Test Method for Determining Compatibility of Liquid-Applied
Sealants with Accessories Used in Structural Glazing Systems.
10. ASTM C1115-00 - Specification for Dense Elastomeric Silicone Rubber Gaskets and
Accessories.
11. ASTM C1172-03 - Specification for Laminated Architectural Flat Glass.
12. ASTM C1281-03 - Specification for Preformed Tape Sealants for Glazing Applications.
13. ASTM C1330-02 - Specification for Cylindrical Sealant Backing for Use with Cold
Liquid Applied Sealants.
14. ASTM E1300-04 - Practice for Determining Load Resistance of Glass in Buildings.
DEAN088000.DOC 088000-1