Specifications - State of Delaware

SECTION 101400 - SIGNAGE
PART 1 - GENERAL
1.01 RELATED DOCUMENTS:
A. Drawings and general provisions of the Contract, including General and Supplementary
Conditions and DIVISION 01 Specification Sections, apply to this Section.
B. DIVISION 01, Section "Sustainable Design Requirements" for LEED ® related requirements
for recycled content materials and local/regionally manufactured and sourced materials.
1.02 SUMMARY:
A. This Section includes the following:
1. Dimensional characters.
2. Panel signs.
3. Interior signs.
4. Exterior building numbers and letters.
1.03 REFERENCES:
A. American Architectural Manufacturers Association:
1. AAMA 611-1998 - Voluntary Specifications for Anodized Architectural Aluminum.
2. AAMA 2603-2002 - Voluntary Specification, Performance Requirements and Test
Procedures for Pigmented Organic Coatings on Aluminum Extrusions and Panels.
B. ASTM International:
1. ASTM A240 -04a - Specification for Chromium and Chromium-Nickel Stainless Steel
Plate, Sheet, and Strip for Pressure Vessels and for General Applications.
2. ASTM A529 -04 - Specification for High Strength Carbon-Manganese Steel of Structural
Quality.
3. ASTM A572 -04 - Specification for High-Strength Low-Alloy Columbium-Vanadium
Structural Steel.
4. ASTM A591 -98 - Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light
Coating Weight Applications.
5. ASTM A653 -04a - Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron
Alloy-Coated (Galvannealed) by the Hot-Dip Process.
6. ASTM A666-03 - Specification for Annealed or Cold-Worked Austenitic Stainless Steel
Sheet, Strip, Plate, and Flat Bar.
7. ASTM A1008 -04b - Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural,
High-Strength Low Alloy and High-Strength Low-Alloy with Improved Formability.
8. ASTM B26 -03 - Specification for Aluminum Alloy Sand Casting.
9. ASTM B36 -01 - Specification for Brass Plate, Sheet, Strip, and Rolled Bar.
10. ASTM B152 -00 - Specification for Copper Sheet, Strip, Plate, and Rolled Bar.
11. ASTM B209-04 - Specification for Aluminum and Aluminum-Alloy Sheet and Plate.
12. ASTM B221-02 - Specification for Aluminum and Aluminum-Alloy Extruded Bars,
Rods, Wire, Shapes, and Tubes.
13. ASTM B584-00 - Specification for Copper Alloy Sand Castings for General
Applications.
14. ASTM D256-04 - Test Methods for Determining the Izod Pendulum Impact Resistance
of Plastics.
15. ASTM D638-03 - Test Method for Tensile Properties of Plastics.
16. ASTM D648-04 - Test Method for Deflection Temperature of Plastics Under Flexural
Load in Edgewise Position.
DEAN101400.DOC 101400-1