Specifications - State of Delaware

SECTION 260553 - ELECTRICAL IDENTIFICATION: continued
g. Push buttons, selector switches, indicating lights (circuit number and voltage not
required on nameplate).
h. Power transfer equipment: Contactors and transfer switches.
i. Transformers (include primary voltage, secondary voltage, and number of phases).
j. Inverters (include input voltage, output voltage, number of input phases).
k. Frequency converters (include input and output frequency).
l. Battery racks.
m. Telephone cabinets and switching equipment (circuit number and voltage not
required on nameplate).
n. TV/audio monitoring master station.
o. Fire alarm master station.
p. Security monitoring master station.
q. Public address system.
r. Wireway used as auxiliary gutter tap locations with circuit number of circuit being
tapped. Provide on outside of wireway.
s. Provide "EMERGENCY" conduit markers on all conduit and pullboxes that contain
emergency power conductors.
t. Switchboard main switches and circuit breakers.
u. Provide wire color coding posted on each panelboard, as required by
NEC 200.6(D).
v. All non-120Vac, 60-hertz receptacles.
2. Install markers, tags, nameplates, and signs at locations indicated, or where not otherwise
indicated, at location for best convenience of viewing without interference with operation
and maintenance of equipment. Secure the identification with fasteners, except use
adhesive where fasteners should not or cannot penetrate surface.
I. Provide self-adhesive white strips with printed branch circuit number on all light switch wall
plates and 120Vac, 60-hertz receptacle wall plates.
END OF SECTION 260553
DEAN260553.DOC 260553-5