Specifications - State of Delaware

LEED 2009 for New Construction and Major Renovations
Delaware ARNG Regional Training Institute 8/28/2012
BID FINAL SUBMITTAL
SPECIFICATION SECTION 018113.13 -- EXHIBIT 1
2 Credit 3 Enhanced Commissioning
DE ARNG has contracted with CxA for Cx and ECx services.
2 Credit 4 Enhanced Refrigerant Management
Achievable based on all R410A refrigerant use.
3 Credit 5
2 Credit 6
Measurement and Verification
Green Power
BMCD recommends M&V plan after one year of stable building operation to set
building baseline for ongoing performance. DE ARNG Energy Manager will develop
M&V Plan and implement.
7 0 7 RP Materials and Resources
Y ? N Notes:
Y Prereq 1 Storage and Collection of Recyclables
Required--must accommodate occupant recycling in FFE. Government will need to
include recycle bins for the breakroom and training rooms into the FFE.
3 Credit 1.1 Building Reuse—Maintain Existing Walls, Floors, and Roof
n/a
Reuse 55%
Reuse 75%
Reuse 95%
1 Credit 1.2 Building Reuse—Maintain 50% of Interior Non-Structural n/a
2 X Credit 2 Construction Waste Management
1 50% Recycled or Salvaged
Requiring 75% waste diversion by Contractor in specifications. Existing building
1 75% Recycled or Salvaged
demolition diversion can contribute heavily.
2 Credit 3 Materials Reuse
Reuse 5%
Reuse 10%
Challenging to meet 5% threshold
2 Credit 4 Recycled Content
2 Credit 5
1 10% of Content
1 20% of Content
Regional Materials
1 10% of Materials
Should be possible with procurement planning. Required of contractor in
1 20% of Materials
specifications.
1 Credit 6 Rapidly Renewable Materials Challenging to meet 2.5% threshold
50% wood products must be FSC-certified (minimal wood). Required of
Certified Wood
contractor in specifications.
1 Credit 7
Should be possible with procurement planning. Required of contractor in
specifications.
11 1 3 RP
Indoor Environmental Quality
Y ? N Notes:
Y Prereq 1 Minimum Indoor Air Quality Performance
Required--design will comply
Y Prereq 2 Environmental Tobacco Smoke (ETS) Control
Required--must show exterior smoking area with signage and non-smoking policy.
Guard sent the no-smoking policy.
1 Credit 1 Outdoor Air Delivery Monitoring
Design includes CO2 monitors in high density spaces; airflow monitors on AHUs
1 Credit 2 Increased Ventilation
Not achievable
1 Credit 3.1 Construction IAQ Management Plan—During Construction
Required of contractor in specifications.
1 Credit 3.2 Construction IAQ Management Plan—Before Occupancy
Required of contractor in specifications.
1 Credit 4.1 Low-Emitting Materials—Adhesives and Sealants
Required of contractor in specifications.
1 Credit 4.2 Low-Emitting Materials—Paints and Coatings
Required of contractor in specifications.
1 Credit 4.3 Low-Emitting Materials—Flooring Systems
Required of contractor in specifications.
1 Credit 4.4 Low-Emitting Materials—Composite Wood/Agrifiber
Required of contractor in specifications.
1 Credit 5 Indoor Chemical and Pollutant Source Control
Plans show 10' entryway system at main entries (not all); MERV 13 filters; isolated
janitor closets. Requires MERV 13 filters by contractor pre-occupancy.
Must have task lighting in all workstations--need Gov't assist to document this credit,
1 Credit 6.1 Controllability of Systems—Lighting
which can be easily achieved.
1 Credit 6.2 Controllability of Systems—Thermal Comfort
Not achievable
1 Credit 7.1 Thermal Comfort—Design
Design will comply and has a DDC BMS
1 Credit 7.2 Thermal Comfort—Verification
Survey occupants on thermal comfort and implement corrections. The Guard will
implement the survey from BMCD's sample survey.
Required daylight levels in all office areas, training rooms, classrooms, conference
1 Credit 8.1 Daylight and Views—Daylight
rooms--need to calculate for compliance.
1 Credit 8.2 Daylight and Views—Views
To meet requirement, training rooms need views.
LEED 2009 for New Construction and Major Renovations Project Checklist 2 of 3