Specifications - State of Delaware

DIVISION 04 - MASONRY
SECTION 042000 - UNIT MASONRY
PART 1 - GENERAL
1.01 RELATED DOCUMENTS:
A. Drawings and general provisions of the Contract, including General and Supplementary
Conditions and DIVISION 01 Specification Sections, apply to this Section.
1.02 SUMMARY:
A. Section Includes:
1. Concrete masonry units.
2. Decorative concrete masonry units.
3. Mortar and grout.
4. Steel reinforcing bars.
5. Masonry joint reinforcement.
6. Ties and anchors.
7. Embedded flashing.
8. Miscellaneous masonry accessories.
9. Cavity-wall insulation.
B. Related Sections:
1. DIVISION 01, Section "Sustainable Design Requirements" for LEED ® related
requirements for recycled content materials and local/regionally manufactured and
sourced materials.
2. DIVISION 05, Section "Structural Steel Framing" for installing anchor sections of
adjustable masonry anchors for connecting to structural steel frame.
3. DIVISION 05, Section "Metal Fabrications" for furnishing steel lintels and shelf angles
for unit masonry.
4. DIVISION 07, Section "Sheet Metal Flashing and Trim" for exposed sheet metal flashing
and for furnishing manufactured reglets installed in masonry joints.
5. DIVISION 07, Section "Thermal Insulation" for liquid vapor barrier.
1.03 REFERENCES:
A. American Concrete Institute:
1. ACI 315-1999 - Details and Detailing of Concrete Reinforcement.
B. American Concrete Institute, Structural Engineering Institute of the American Society of Civil
Engineers, and The Masonry Society:
1. ACI 530.1/ASCE 6/TMS 602-2005 - Specification for Masonry Structures.
C. ASTM International:
1. ASTM A36-05 - Specification for Carbon Structural Steel.
2. ASTM A82-05a - Specification for Steel Wire, Plain, for Concrete Reinforcement.
3. ASTM A153-05 - Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware.
4. ASTM A240-07 - Specification for Chromium and Chromium-Nickel Stainless Steel
Plate, Sheet, and Strip for Pressure Vessels and for General Applications.
5. ASTM A276-06 - Specification for Stainless Steel Bars and Shapes.
6. ASTM A307-04 - Specification for Carbon Steel Bolts and Studs, 60, 000 PSI Tensile
Strength.
7. ASTM A563-04 - Specification for Carbon and Alloy Steel Nuts.
8. ASTM A580-06 - Specification for Stainless Steel Wire.
DEAN042000.DOC 042000-1