Specifications - State of Delaware

DIVISION 08 - DOORS AND WINDOWS
SECTION 081113 - HOLLOW METAL DOORS AND FRAMES
PART 1 - GENERAL
1.01 RELATED DOCUMENTS:
A. Drawings and general provisions of the Contract, including General and Supplementary
Conditions and DIVISION 01 Specification Sections, apply to this Section.
1.02 SUMMARY:
A. Section Includes:
1. Standard hollow metal doors and frames.
B. Related Sections:
1. DIVISION 01 Section "Sustainable Design Requirements" for LEED ® related
requirements for recycled content materials and local/regionally manufactured and
sourced materials.
2. DIVISION 04 Section "Unit Masonry" for embedding anchors for hollow metal work
into masonry construction.
3. DIVISION 08 Section "Door Hardware" for door hardware for hollow metal doors.
4. DIVISION 09 Sections "Exterior Painting" and "Interior Painting" for field painting
hollow metal doors and frames.
1.03 REFERENCES:
A. ASTM International:
1. ASTM A153 -09 - Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware.
2. ASTM A653 -09 - Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron
Alloy-Coated (Galvannealed) by the Hot-Dip Process.
3. ASTM A879 - Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for
Applications Requiring Designation of the Coating Mass on Each Surface.
4. ASTM A1008 -09 - Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-
Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution
Hardened, and Bake Hardenable.
5. ASTM A1011 -09a - Specification for Steel, Sheet and Strip, Hot Rolled, Carbon,
Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved
Formability, and Ultra-High Strength.
6. ASTM C143 -08 - Test Method for Slump of Hydraulic Cement Concrete.
7. ASTM C476-09 - Specification for Grout for Masonry.
8. ASTM C665-06 - Specification for Mineral-Fiber Blanket Thermal Insulation for Light
Frame Construction and Manufactured Housing.
9. ASTM C1363-05 - Test Method for the Thermal Performance of Building Materials and
Envelope Assemblies by Means of a Hot Box Apparatus.
10. ASTM E136-09 - Test Method for Behavior of Materials in a Vertical Tube Furnace at
750ºC.
B. Builders Hardware Manufacturers Association:
1. BHMA A156.115 (2006) - Hardware Preparation in Steel Doors and Steel Frames
(ANSI).
C. Hollow Metal Manufacturers Association; Division of National Association of Architectural
Metal Manufacturers:
1. NAAMM-HMMA 803 (2008) - Hollow Metal Manual - Steel Tables.
2. NAAMM-HMMA 840 (2007) - Installation and Storage of Hollow Metal Doors and
Frames.
DEAN081113.DOC 081113-1