Specifications - State of Delaware

DIVISION 09 - FINISHES
SECTION 092216 - NON-STRUCTURAL METAL FRAMING
PART 1 - GENERAL
1.01 RELATED DOCUMENTS:
A. Drawings and general provisions of the Contract, including General and Supplementary
Conditions and DIVISION 01 Specification Sections, apply to this Section.
1.02 SUMMARY:
A. Section Includes:
1. Non-load-bearing steel framing systems for interior gypsum board assemblies.
B. Related Requirements:
1. DIVISION 01 Section "Sustainable Design Requirements" for LEED related
requirements for recycled content materials and local/regionally manufactured and
sourced materials.
2. DIVISION 05 Section "Cold-Formed Metal Framing" for exterior and interior loadbearing
and exterior non-load-bearing wall studs.
1.03 REFERENCES:
A. ASTM International:
1. ASTM A641/641M-03 - Specification for Zinc-Coated (Galvanized) Carbon Steel Wire.
2. ASTM A653/653M-07 - Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-
Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process.
3. ASTM C645-08a - Specification for Nonstructural Steel Framing Members.
4. ASTM C754-07 - Specification for Installation of Steel Framing Members to Receive
Screw-Attached Gypsum Panel Products.
5. ASTM C840-07 - Specification for Application and Finishing of Gypsum Board.
6. ASTM D226-06 - Specification for Asphalt-Saturated Organic Felt Used in Roofing and
Waterproofing.
7. ASTM E90-04 - Test Method for Laboratory Measurement of Airborne Sound
Transmission Loss of Building Partitions and Elements.
8. ASTM E119-08a - Test Methods for Fire Tests of Building Construction and Materials.
9. ASTM E413-04 - Classification for Rating Sound Insulation.
10. ASTM E488-96 (Reapproved 2003) - Test Methods for Strength of Anchors in Concrete
and Masonry Elements.
11. ASTM E1190-95 (Reapproved 2007) - Test Methods for Strength of Power-Actuated
Fasteners Installed in Structural Members.
1.04 SUBMITTALS:
A. Product Data: For each type of product.
B. LEED ® Submittals:
1. Product Data for Credit MR 4: For products having recycled content, documentation
indicating percentages by weight of postconsumer and preconsumer recycled content.
Include statement indicating costs for each product having recycled content.
2. Product Data for Credit MRc5: For products and materials complying with requirements
for regional materials, submit documentation indicating location and distance from
Project of material manufacturer and point of extraction, harvest, or recovery for each
DEAN092216.DOC 092216-1