Specifications - State of Delaware

SECTION 093000 - PORCELAIN TILE
PART 1 - GENERAL
1.01 REFERENCES:
A. The publications listed below form a part of this Specification to the extent referenced. The
publications are referred to within the text by the basic designation only.
1. ASTM International (ASTM):
a. ASTM C1026 - Standard Test Method for Measuring the Resistance of Ceramic
Tile to Freeze-Thaw Cycling, 1987; R 2002.
b. ASTM C1027 - Standard Test Method for Determining Visible Abrasion Resistance
of Glazed Ceramic Tile, 1999; R 2004.
c. ASTM C1028 - Standard Test Method for Determining the Static Coefficient of
Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer
Pull-Meter Method, 2007.
d. ASTM C144 - Standard Specification for Aggregate for Masonry Mortar, 2004.
e. ASTM C150 - Standard Specification for Portland Cement, 2007.
f. ASTM C206 - Standard Specification for Finishing Hydrated Lime, 2003.
g. ASTM C207 - Standard Specification for Hydrated Lime for Masonry Purposes,
2006.
h. ASTM C241 - Standard Specification for Abrasion Resistance of Stone Subjected to
Foot Traffic, 1990; R 2005.
i. ASTM C373 - Water Absorption, Bulk Density, Apparent Porosity, and Apparent
Specific Gravity of Fired Whiteware Products, 1988; R 2006.
j. ASTM C482 - Bond Strength of Ceramic Tile to Portland Cement, 2002.
k. ASTM C501 - Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber
Abraser, 1984; R 2002.
l. ASTM C648 - Breaking Strength of Ceramic Tile, 2004.
m. ASTM E2129 - Standard Practice for Data Collection for Sustainability Assessment
of Building Products, 2005.
2. Bay Area Air Quality Management District (Bay Area AQMD):
a. Bay Area AQMD Rule 8-51 - Adhesive and Sealant Products, 1992; R 2001.
3. Green Seal (GS):
a. GS-36 - Commercial Adhesives, 2000.
4. National Fire Protection Association:
a. NFPA 99 - Health Care Facilities, 2005; Errata 2005.
5. South Coast Air Quality Management District (SCAQMD):
a. SCAQMD Rule 1168 - Adhesive and Sealant Applications, 1989; R 2005.
6. Tile Council of America (TCA):
a. TCA Hdbk - Handbook for Ceramic Tile Installation, 2007.
7. U.S. Green Building Council (USGBC):
a. LEED ® - Leadership in Energy and Environmental Design Green Building Rating
System for New Construction (LEED-NC), 2002; R 2005.
1.02 SUBMITTALS:
A. Submit the following in accordance with SECTION 013300 - SUBMITTAL PROCEDURES:
1. Product Data:
a. Local/Regional Materials; LEED.
(1) Submit LEED Documentation indicating distance between manufacturing
facility and the project site.
(2) Indicate distance of raw material origin from the project site.
DEAN093000.DOC 093000-1