Specifications - State of Delaware

SECTION 053100 - STEEL DECKING
PART 1 - GENERAL
1.01 RELATED DOCUMENTS:
A. Drawings and general provisions of the Contract, including General and Supplementary
Conditions and DIVISION 01 Specification Sections, apply to this Section.
1.02 SUMMARY:
A. Section Includes:
1. Roof deck.
1.03 REFERENCES:
A. American Iron and Steel Institute:
1. North American Specification for the Design of Cold-Formed Steel Structural Members,
2007.
B. American Welding Society:
1. AWS D1.3 (2008) - Structural Welding Code - Sheet Steel.
C. ASTM International:
1. ASTM A653-07 - Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron
Alloy-Coated (Galvannealed) by the Hot-Dip Process.
2. ASTM A780-01 (Reapproved 2006) - Practice for Repair of Damaged and Uncoated
Areas of Hot-Dip Galvanized Coatings.
D. FM Global:
1. Approval Guide, Building Materials, 2008.
E. Steel Deck Institute:
1. SDI Publication No. 31 (2007) - Design Manual for Composite Decks, Form Decks, and
Roof Decks.
1.04 SUBMITTALS:
A. Product Data: For each type of deck, accessory, and product indicated.
B. LEED ® Submittals:
1. Product Data for Credit MR 4: For products having recycled content, documentation
indicating percentages by weight of postconsumer and preconsumer recycled content.
Include statement indicating cost for each product having recycled content.
2. For products and materials complying with requirements for regional materials, submit
documentation indicating location and distance from Project of material manufacturer
and point of extraction, harvest, or recovery for each raw material. Include statement
indicating cost for each regional material and the fraction by weight that is considered
regional.
C. Shop Drawings:
1. Include layout and types of deck panels, anchorage details, reinforcing channels, pans,
cut deck openings, special jointing, accessories, and attachments to other construction.
1.05 INFORMATIONAL SUBMITTALS:
A. Welding certificates.
B. Product Certificates: For each type of steel deck.
C. Field quality-control reports.
1.06 QUALITY ASSURANCE:
A. Testing Agency Qualifications: Qualified according to ASTM E329 for testing indicated.
DEAN053100.DOC 053100-1