Specifications - State of Delaware

SECTION 224000 - PLUMBING FIXTURES: continued
e. Color: White.
2.05 PROTECTIVE SHIELDING GUARDS:
A. Protective Shielding Piping Enclosures, LAV-2:
1. Manufacturers: Subject to compliance with requirements, provide products by one of the
following or an approved equal:
a. TRUEBRO, Inc.
2. Description: Manufactured plastic enclosure for covering plumbing fixture hot- and
cold-water supplies and trap and drain piping. Comply with ADA requirements.
2.06 FIXTURE SUPPORTS:
A. Manufacturers: Subject to compliance with requirements, provide products by one of the
following or an approved equal:
1. Josam Company.
2. MIFAB Manufacturing Inc.
3. Smith, Jay R. Mfg. Co.
4. Tyler Pipe; Wade Div.
5. Watts Drainage Products Inc.; a div. of Watts Industries, Inc.
6. Zurn Plumbing Products Group; Specification Drainage Operation.
B. Water-Closet Supports, WC-1, WC-2:
1. Description: Combination carrier designed for accessible or standard mounting height of
wall-mounting, water-closet-type fixture. Include single or double, vertical or horizontal,
hub-and-spigot or hubless waste fitting as required for piping arrangement; faceplates;
couplings with gaskets; feet; and fixture bolts and hardware matching fixture. Include
additional extension coupling, faceplate, and feet for installation in wide pipe space.
C. Urinal Supports, U-1, U-2:
1. Description: Type II, urinal carrier with hanger and bearing plates for wall-mounting,
urinal-type fixture. Include steel uprights with feet.
2. Accessible-Fixture Support: Include rectangular steel uprights.
D. Lavatory Supports, LAV-2:
1. Description: Type II, lavatory carrier with concealed arms and tie rod for wall-mounting,
lavatory-type fixture. Include steel uprights with feet.
2. Accessible-Fixture Support: Include rectangular steel uprights.
2.07 DISPOSERS:
A. Disposers, SK-1:
1. Basis of Design Product: Subject to compliance with requirements, provide In-Sink-
Erator model Badger 5 or a comparable product by one of the following or an approved
equal:
a. Franke Consumer Products, Inc.; Kitchen Systems Div.
b. In-Sink-Erator; a div. of Emerson Electric Co.
c. KitchenAid.
d. Maytag Co.
2. Description: Continuous-feed household, food-waste disposer. Include reset button; wall
switch; corrosion-resistant chamber with jam-resistant, cutlery- or stainless-steel grinder
or shredder; NPS 1-1/2 outlet; quick-mounting, stainless-steel sink flange; antisplash
guard; and combination cover/stopper.
a. Type: Continuous-feed household.
b. Motor: 115Vac, 1,725 rpm, 1/2 hp with overload protection.
DEAN224000.DOC 224000-7