Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
1-1-29 Private Line Assignment
General Description
Use this Memory Block to assign an outside line as a private line. The private line
cannot be seized by any other telephone, and an LED indication is not provided to
other terminals.
Display
Programming Procedures
1 Go off-line.
Data
No.
2 Press LK1 + LK1 + BI to access the Memory Block.
3 Enter the data using the dial pad.
Use the following to enter data:
�
Jto move the cursor left
Lto move the cursor right
K~Ito enter numeric data
H to clear all data when cursor is at CO No. or Tel. Port No.
Default Values
Not Specified
4 Press G to write the data. Data for the second line is displayed. Move the cursor to change the data.
5 Press G to write the data and display the next Memory Block.
6 Program the next Memory Block or press E to go back on-line.
Related Programming
Combination
No.
Title (1/2)
M.B. Number Memory Block Name
No. CO
(01~64)
2 9 : P 1 C = T =
T I M E D I S P L A Y
2-06 Line Key Selection for Tenant Mode
Port No.
Tel.
(01~CO)
4-12 Line Key Selection for Telephone Mode
1. Two private lines can be assigned to one station or one private line can be assigned to two stations.
2. A Single Line Telephone (SLT) user cannot dial the Trunk Group Access Code to access a private line. The
Single Line Telephone user can dial the specified Line Seizure Access Code assigned in Memory Blocks 1-1-46/
1-1-47 [Access Code (1-digit/2-digit) Assignment], Function 063 or 064 to access the line.
� Notes �
System Mode
1
Submode
1
Data No.
29
PC Programming
�+BCS
3. When a station is allowed Barge-In originate, and a second station is allowed Barge-In receive, Barge-In is not
allowed on a private line unless both stations share the private line.
___________________________________________________________________________________
2 - 40 Memory Blocks