Electra Elite IPK Programming Manual - Southwestern Telephone ...

Document Revision 4 Electra Elite IPK
___________________________________________________________________________________
LK 1 System Mode
Data
No.
LK 1 CO Line (Continued)
Memory Block Name Default Value Programming Values
63 Hold Recall Time Selection
(Exclusive)
65 Code Restriction Class Allow/Deny
Selection
66 8-Digit Matching Table to Normal
Dial Assignment
1.0 (R2500 or lower)
060s (R3000 or
higher)
Class 01 ~ 04 – YS
Class 05 ~ 14 – NO
Tables 00 ~ 14 =
Used
(All CO/PBX Line
LEDs On)
Table 15 = Unused
(CO/PBX Line LED
Off)
67 OCC Table Assignment Tables 00 ~ 15 =
Blank
Table 16 =
1010XXX
68 8-Digit Matching Table to OCC
Table Assignment
69 Tie Line Code Restriction
Assignment
70 Code Restriction Class Assignment
when Lockout is Set
71 First Delay Announcement Start
Time Selection
72 First Delay Announcement Repeat
Selection
73 First to Second Delay
Announcement Interval Time
Selection
74 Second Delay Announcement
Repeat Selection
75 Second Delay Announcement
Repeat Interval Time Selection
CO/PBX Line LED
Off
In minutes: 0.5, 1.0, 1.5, 2.0, 3.0,
5.0, 8.0, ∞ (No Limit) (R2500 or lower)
000s (No Limit), 001s~999s (R3000 or
higher)
YS (Allow)
NO (Deny)
___________________________________________________________________________________
1 - 16 Multiline Terminal Programming
N/A
N/A
Refer to 1-1-68 8-Digit Matching Table
to OCC Table Assignment on page
2-88.
YS NO = No Restriction
YS = Restriction
15 Class 00 ~ 15
20 In seconds: 00, 10, 20, 30, 40, 50, 60
1 1, 2, 3, 4, 5, 6, 7, 8
20 In seconds: 00, 10, 20, 30, 40, 50, 60,
∞ (No Limit)
1 1~ 8
20 In seconds: 00, 10, 20, 30, 40, 50, 60,
∞ (No Limit)
76 Barge-In Alert Tone Assignment YS YS = Send Alert Tone
NO = Do not send Alert Tone