Electra Elite IPK Programming Manual - Southwestern Telephone ...

Electra Elite IPK Document Revision 4
___________________________________________________________________________________
4-10 Station Number Assignment
General Description
Use this Memory Block to assign a station number to each telephone.
R2500 is required for 5-, 6-, or 7-digit Extension Numbers.
Display (R1700 or lower)
Tel
Port
Display (R2000 or higher)
The number displayed after the leading digits is from Memory Block 1-2-34 (Expanded Station Number Assignment) when
�
assigned (R2500 is required).
Programming Procedures
1 Go off-line.
No.
(01~C0)
0 1 / 1 0 : S T A - 1 0 0
Tel
Port
No.
(01~C0)
Data
No.
T I M E D I S P L A Y
Data
No.
Title
Title
Setting
Data
0 1 / 1 0 : S T A X X X 1 0 0
T I M E D I S P L A Y
Setting
Data
2 Press LK4 + AK to access the Memory Block.
3 Use dial pad to assign a 2- (10~89), 3- (100~899), 4-digit (1000~8999), or 5~7, 4-digit
(0000~9999) station number for Tel Port No.
Use the following to enter data:
�
Jto move the cursor left
Lto move the cursor right
K~Ito enter numeric data or Tel Port No.
– OR –
D to go to next assigned Tel Port No.
B + Ato enter A for Port Numbers 100~109
B + Bto enter B for Port Numbers 110~119
B + Cto enter C for Port Number 120
4 Press G to write the data and display the next Memory Block.
5 Program the next Memory Block or press E to go back on-line.
Default Values
Telephone Mode
4
Submode
—
Data No.
10
PC Programming
�+BS
Valid Station Numbers are 100~399.
___________________________________________________________________________________
Programming Manual 2 - 513