Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
Related Programming
M.B. Number Memory Block Name
7-1 Card interface Slot Assignment
1-13-01 PRT Signal Format Selection
1-13-02 Clear Channel Selection
1-13-03 Call by Call Service Selection
1-13-04 PRT B Channel Outgoing Priority Selection
1-13-05 PRT B Channel-to-Trunk Group Assignment
1. Only 16 Channels can be assigned with the Elite IPK Basic Port Package.
1. UP to eight PRT ETUs can be assigned.
� Notes �
2. PRT(1)-U( ) firmware, version 4.0 or higher is required for individual channel assignment.
3. When the PRT(1)-U( ) has firmware, version 3.6 or lower, available channels are Channel 1 to the last channel
assigned in this Memory Block.
4. The number of available channels depends on the PRT(1)-U( ) assigned in Memory Block 7-1.
For example, when PRT8 is assigned in Memory Block 7-1, any eight channels can be assigned (allowed) in this
Memory Block. Any channel skipped (Not Assigned) is still an available channel from 0 to the last assigned
channel.
___________________________________________________________________________________
2 - 308 Memory Blocks