Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
1-15-17 Centralized BLF Send Time
Assignment
General Description
Use this Memory Block to assign the time interval for sending BLF information across
the K-CCIS Network.
R1500 or higher is required.
Display
Settings
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
4 Seconds
(04s)
8 Seconds
(08s)
Programming Procedures
1 Go off-line.
Data
No.
12 Seconds
(12s)
16 Seconds
(16s)
2 Press LK1 + LK15 + AG to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the Setting Data option.
4 Press G to write the data, and display the next Memory Block.
5 Program the next Memory Block or press E to go back on-line.
Related Programming
Title
1 7 : S E N D T I M E 0 4 s
T I M E D I S P L A Y
M.B. Number Memory Block Name
7-1 Card Interface Slot Assignment
7-3-01 MIF (LCR) Assignment
7-3-02 MIF (SMDR) Assignment
1-15-00 K-CCIS Main/Remote Office Selection
1-15-01 Common Signal Channel Data Speed Assignment
1-15-02 Common Signal Channel Assignment
1-15-03 Originating Point Code Assignment
Setting
Data
1-15-04 Destination Point Code Assignment
selection is the
default.
System Mode
1
Submode
15
Data No.
17
PC Programming
�+AW
___________________________________________________________________________________
2 - 368 Memory Blocks