Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
1-1-68 8-Digit Matching Table to OCC Table
Assignment
General Description
Use this Memory Block to assign each 8-Digit Matching Table to each Other Common
Carrier (OCC) Code Table.
Display
Settings
Page 1
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8
Table 00
Page 2
Table 01 Table 02 Table 03 Table 04 Table 05 Table 06 Table 07
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8
Table 08 Table 09 Table 10 Table11 Table 12 Table13 Table14 Table15
Programming Procedures
1 Go off-line.
Data
No.
2 Press LK1 + LK1 + FH to access the Memory Block.
3 Press the corresponding CO/PBX line key to change data option.
Use the following to enter data:
�
C to access the next page
A to access the previous page
Each time a CO/PBX line key is pressed, the LED toggles between On
�
and Off.
Related Programming
Refer to Chapter 3 Advanced Applications, Section 1 Code Restriction on page 3-1.
Default Values
Default not
assigned.
OCC Tables 01~15:
All Matching Tables Not Used
OCC Table 16:
Matching Tables 00~14 Not Used
Matching Table 15 Used
4 Press G to write the data and advance to the next OCC table. Repeat steps 3 and 4 until last OCC data is entered.
5 The next Memory Block is displayed.
OCC
Table
Title Page No.
01~16
6 8 : 8 D G O C C ( 0 1 ) | 1
T I M E D I S P L A Y
CO/PBX Line LED Off On
Data Unused Used
The shaded area
is the default
setting.
6 Program the next Memory Block or press E to go back on-line.
System Mode
1
Submode
1
Data No.
68
PC Programming
�+AC
___________________________________________________________________________________
2 - 88 Memory Blocks