Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Electra Elite IPK Document Revision 4
1-12-00 ACD/UCD Group Pilot Number
Assignment
General Description
Use this Memory Block to specify the Pilot Number of an Automatic Call Distribution/
Uniform Call Distribution (ACD/UCD) Group where incoming calls are terminated.
Display
Programming Procedures
1 Go off-line.
Data
Group No.
(1~4) Title
No.
2 Press LK1 + LK12 to access the Memory Block.
3 Enter data using the dial pad.
Use the following to enter data:
�
Jto move the cursor left
Lto move the cursor right
K~Ito enter numeric data
Setting Data:
�
Pilot No.
2-digit (10~89)
3-digit (100~899)
4-digit (1000~8999)
4 Press G to write the data. The next Memory Block is displayed.
5 Program Memory Block 1-12-01 and 1-12-02. The next Group No. is displayed.
Default Values
Not Specified
6 Repeat Steps 3, 4, and 5 for each Group No. After Group 4 is programmed, Group 1 for Memory Block 1-12-00 is displayed.
7 Press E to go back on-line.
Related Programming
0 1 / 0 0 : P I L O T =
M.B. Number Memory Block Name
Data
Setting
No.
(Pilot
max. 4 Digits)
T I M E D I S P L A Y
1-1-46 Access Code (1-Digit) Assignment
1-1-47 Access Code (2-Digit) Assignment
1-1-48 Access Code (3-Digit) Assignment
1-2-03 2-, 3-, 4-Digit Station Number Selection
System Mode
1
Submode
12
Data No.
00
PC Programming
�+AA
___________________________________________________________________________________
Programming Manual 2 - 301