Electra Elite IPK Programming Manual - Southwestern Telephone ...

Document Revision 4 Electra Elite IPK
___________________________________________________________________________________
Programming Procedures (Continued)
3 Press the CO/PBX Line key. The LED indication changes to indicate the data
each time the CO/PBX line key is pressed.
Use the following to enter data:
�
Jto move the cursor left
Lto move the cursor right
K~Ito enter number data
C to go to next page
A to go to previous page
D to go to the next assigned Tenant No.
CO/PBX
Line LED
Default Values
4 After entering data for both pages, press G to write the data. The next Memory Block is displayed.
5 Program the next Memory Block or press E to go back on-line.
Related Programming
M.B. Number Memory Block Name
Off On
Data No (Not Assigned) Yes (Assigned)
1-1-35 Speed Dial Buffer Allocation
1-8-07 Class of Service (Attendant) Feature Selection 1
The shaded
selection is the
default.
� Notes �
All Speed Dial confirmation allowed
1. When Deny is specified, no display is presented even when a System Speed Dial call is originated.
2. Divide the Speed Dial numbers into groups and specify, per tenant, whether confirmation is allowed or denied.
3. Station Message Detail Recording (SMDR) prints telephone numbers.
___________________________________________________________________________________
2 - 422 Memory Blocks