Electra Elite IPK Programming Manual - Southwestern Telephone ...

Electra Elite IPK Document Revision 4
___________________________________________________________________________________
3-67 CO/PBX Ringing Pattern Selection
General Description
Use this Memory Block to specify the ringing pattern assigned to each CO/PBX line.
Display
Settings
Page 1
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8
– (None)
Ringing
Pattern A
Ringing
Pattern B
Ringing
Pattern C
Ringing
Pattern D
Ringing
Pattern E
Ringing
Pattern F
Ringing
Pattern G
Page 2
LK 1
Ringing
Pattern H
LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8
Programming Procedures
1 Go off-line.
CO/PBX
No.
(01~64)
2 Press LK3 + G + FG to access the Memory Block.
3 Press line key to specify the Ringing pattern assigned to CO/PBX No.
Use the following to enter data:
�
Jto move the cursor left
Lto move the cursor right
K~Ito enter numeric data or CO/PBX No.
– OR –
D to go to the next assigned CO/PBX No.
C to go to the next page
A to go to the previous page
4 Press G to write the selected data and display the next Memory Block.
5 Program the next Memory Block or press E to go back on-line.
Related Programming
Data
Title
No.
0 1 / 6 7 : C O R N G – | 1
T I M E D I S P L A Y
M.B. Number Memory Block Name
Setting
Page
Data
4-57 CO Line Ringing Pattern Priority Selection
CO/PBX Line Mode
3
Submode
—
Data No.
67
PC Programming
�+BCT
The shaded
selection is the
default.
___________________________________________________________________________________
Programming Manual 2 - 489