Electra Elite IPK Programming Manual - Southwestern Telephone ...

Electra Elite IPK Document Revision 4
___________________________________________________________________________________
4-40 LCR Class Selection
General Description
Use this Memory Block to specify per station the Least Cost Routing (LCR) Class. The
Electra Elite IPK system has four Area Code Tables. Each LCR Class can have
different Trunk group access to allow priority levels for the station user. This Memory
Block can be used to specify either the LCR Class or the Automatic Route Selection
(ARS) Class (Tables 1~4) depending on the system configuration.
Display
Settings
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
selection is the
default.
0 1 2 3 4
Numbers are
LCR Classes.
Programming Procedures
1 Go off-line.
Tel
Port
No.
(01~C0)
Data
No.
Title
2 Press LK4 + DK to access the Memory Block.
3 Press line key to specify LCR Class for Tel Port No.
Use the following to enter data:
�
Jto move the cursor left
Lto move the cursor right
Setting
Data
0 1 / 4 0 : L C R C L S = 0
T I M E D I S P L A Y
K~Ito enter numeric data or Tel Port No.
– OR –
D to go to next assigned Tel Port No.
B + Ato enter A for Port Numbers 100~109
B + Bto enter B for Port Numbers 110~119
B + Cto enter C for Port Number 120
4 Press G to write the data and display the next Memory Block.
5 Program the next Memory Block or press E to go back on-line.
Telephone Mode
4
Submode
—
Data No.
40
PC Programming
�+BTT
___________________________________________________________________________________
Programming Manual 2 - 551