Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
1-15-12 Centralized Billing – Point Code of
Center Office Assignment
General Description
Use this Memory Block to assign the Common Signaling Channel number and point
code of the Billing Center Office (NEAX2000/2400).
Display
Programming Procedures
1 Go off-line.
Data
No.
2 Press LK1 + LK15 + AB to access the Memory Block.
3 Use dial pad keys to enter C-Channel and Point Code.
Use the following to enter data:
�
Jto move cursor left
Lto move cursor right
K~ Ito enter numeric data
Point code range is 00001~16367.
4 Press G to write the data, and display the next Memory Block.
5 Press E to go back on-line.
Related Programming
Title
C-Ch
1~4
1 2 : B I L C C H O
M.B. Number Memory Block Name
7-1 Card Interface Slot Assignment
7-3-01 MIF (LCR) Assignment
7-3-02 MIF (SMDR) Assignment
Point
Code
T I M E D I S P L A Y
1-15-00 K-CCIS Main/Remote Office Selection
1-15-01 Common Signal Channel Data Speed Assignment
1-15-02 Common Signal Channel Assignment
1-15-03 Originating Point Code Assignment
1-15-04 Destination Point Code Assignment
1-15-05 Destination Point Code Transfer Assignment
Default Values:
___________________________________________________________________________________
2 - 358 Memory Blocks
Blank
System Mode
1
Submode
15
Data No.
12
PC Programming
�+AW