Electra Elite IPK Programming Manual - Southwestern Telephone ...

Document Revision 4 Electra Elite IPK
___________________________________________________________________________________
4-95 DTMF/DP SLT Type Selection
General Description
Use this Memory Block to specify per port whether Dial Pulse or Dual-Tone
Multifrequency (MF) Single Line Telephone is connected to the system.
Display
Settings
Tel
Port
No.
(01~C0)
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
selection is the
DP MF
default.
Programming Procedures
1 Go off-line.
Data
No.
Title
2 Press LK4 + IE to access the Memory Block.
3 Press LK1 to specify Dial Pulse for single line telephones connected to the system.
Use the following to enter data:
�
Jto move the cursor left
Lto move the cursor right
Setting
Data
0 1 / 9 5 : S L T = M F
T I M E D I S P L A Y
K~Ito enter numeric data or Tel Port No.
– OR –
D to go to next assigned Tel Port No.
B + Ato enter A for Port Numbers 100~109
B + Bto enter B for Port Numbers 110~119
B + Cto enter C for Port Number 120
4 Press G to write the data and display the next Tel Port No. for Memory Block 4-90.
5 Repeat Steps 3 and 4 for all Tel Port Nos. Tel Port No. 01 for Memory Block 4-90 is displayed.
Telephone Mode
4
Submode
—
Data No.
95
PC Programming
�+BTI
___________________________________________________________________________________
2 - 606 Memory Blocks