Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Electra Elite IPK Document Revision 4
Code Restriction Class Allow/Deny Selection (Memory Block 1-1-65)
This Memory Block assigns the Code Restriction Classes (01~14) as
Allow or Deny. This assignment is used when there is no match or
when there is an overlap (duplicate numbers in tables with opposite
Allow/Deny assignments) of numbers in the 8-Digit Matching Tables.
8-Digit Matching Table Operations
The 8-Digit Matching Tables are used to restrict specific or all OCC
calls and non-OCC calls. To understand the relationship of the
8-Digit Matching Tables with OCC calls, refer to Section 6.4.2 - OCC
Assignment/Operation.
When a restricted station user makes a non-OCC call, the system
monitors the first eight digits dialed and searches the 8-Digit
Matching Tales assigned for Used in Memory Block 1-1-66 (8-Digit
Matching Table to Normal Dial Assignment). The system searches
only the 8-Digit Matching Tables assigned to the Code Restriction
Class the station is assigned to and has the Trunk group assigned to
it for the in-use trunk the station is on.
When a match is found, the system looks at the 8-Digit Matching
Table to Class Assignment for the Allow or Deny Assignment. When
the table is assigned as Allow, the call is allowed. When the table is
assigned as Deny, the call is denied.
When a match is not found or a duplicate match is made with
opposite Allow/Deny Assignments, the system looks at the class
Allow/Deny Assignment. When the class is assigned as Allow, the
call is allowed. When the Class is assigned as Deny, the call is
denied. When the interdigit time of the dialing party exceeds 10
seconds while the station user is dialing on an outside line, and the
system is searching the assigned tables, the system automatically
drops the call.
1.4.4 System Speed Dial Override by Class Selection (Memory Block
1-1-62)
This Memory Block allows System Speed Dial buffers to override or
not override Code Restriction. Each Code Restriction Class (01~14)
is assigned as Allow or Deny.
1.4.5 Tie Line Code Restriction Assignment (Memory Block 1-1-69)
This Memory Block assigns system-wide Code Restriction to be
used or not used for calls made on a Tie line.
___________________________________________________________________________________
Programming Manual 3 - 5