Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Electra Elite IPK Document Revision 4
Display (R3000 or higher)
Data
No.
Programming Procedures
1 Go off-line.
2 Press LK1 + LK2 + BC to access the Memory Block.
3 Use the dial pad to enter the Data Setting for Class 1.
Setting Data
001s~999s (e.g., 120s = 2 Minutes)
4 Press G to write the data and display the next Timer Class of Service.
5 Program the next Timer Class of Service or press E to go back on-line.
Related Programming
Title
M.B. Number Memory Block Name
Timer
Class
1~4
2 3 : P R K R C L 1 = 0 6 0 s
T I M E D I S P L A Y
4-71 Station to Timer Class of Service
Setting
Data
Default Values
Class 1~4 = 060s
Notes �
�
1. Telephone Ports 1 and 2 are in Station to Timer Class of Service, Class 1, by default. All other ports are in
Station to Timer Class of Service, Class 2, by default.
2. When a system is upgraded from R2500 or lower to R3000 or higher, the System Call Park Recall Time
Selection is reset to the default during the upgrade process.
___________________________________________________________________________________
Programming Manual 2 - 125