Electra Elite IPK Programming Manual - Southwestern Telephone ...

Electra Elite IPK Document Revision 4
___________________________________________________________________________________
Related Programming
M.B. Number Memory Block Name
3-50 ISDN Line SPID Assignment
3-52 ISDN Trunk Directory Number Assignment
3-91 Trunk Type Selection
1-1-20 DID Digit Length Selection
1-1-21 DID Digit Conversion Assignment
1-1-22 DID Digit Conversion Table
1-1-23 DID Forward Station Number for Busy Station or Undefined Digit
1. R4000 or higher is required to support this Memory Block.
� Notes �
2. When YES is selected, the BRT/PRT allows only a Directory Number as assigned in Memory Block 3-52 (ISDN
Trunk Directory Number Assignment).
3. When NO is selected, the BRT/PRT always passes the Directory Number to the CPU.
4. This Memory Block can be used to make the ISDN-BRI trunks into DID when set to YES.
5. When this Memory Block is changed, the ISDN-BRI ETU must be reset.
6. When this Memory Block is changed, from YS to NO or NO to YS, the appropriate BRT ETU must be reset.
___________________________________________________________________________________
Programming Manual 2 - 497