Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
1-1-74 Second Delay Announcement Repeat
Selection
General Description
Use this Memory Block to specify the number of times a Second Delay Announcement
is repeated.
Display
Settings
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
selection is the
1 2 3 4 5 6 7 8 default.
Programming Procedures
1 Go off-line.
2 Press LK1 + LK1 + GD to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
4 Press G to write the data and display the next Memory Block.
5 Program the next Memory Block or press E to go back on-line.
Related Programming
Data
Title
No.
M.B. Number Memory Block Name
Setting
Data
7 4 : M S G 2 S E N D = 1
T I M E D I S P L A Y
1-1-73 First to Second Delay Announcement Interval Time Selection
1-1-75 Second Delay Announcement Repeat Interval Time Selection
1-8-12 VRS Message Recording Time Selection
1-8-13 VRS Message Function Assignment
3-41 Delay Announcement Assignment
Notes �
�
1. This Memory Block does not display unless the MIFA-U( ) ETU is installed.
System Mode
1
Submode
1
Data No.
74
PC Programming
�+AR
2. When Memory Block 2-08 is used, this is the number of times the message is played back-to-back. After this is
done, the system looks at 1-1-75 to repeat the procedure.
___________________________________________________________________________________
2 - 94 Memory Blocks