Electra Elite IPK Programming Manual - Southwestern Telephone ...

Document Revision 4 Electra Elite IPK
___________________________________________________________________________________
4-92 Receiving Volume Selection
General Description
Use this Memory Block to specify whether receiving volume is returned to normal
(DOWN) or kept as is (UP) on a call after hanging up.
Display
Settings
Tel
Port
No.
(01~C0)
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
selection is the
DOWN UP
default.
Programming Procedures
1 Go off-line.
Data
No.
Title
2 Press LK4 + IB to access the Memory Block.
3 Press LK2 to keep volume UP after hanging up a call.
Use the following to enter data:
�
Jto move the cursor left
Lto move the cursor right
Setting
Data
0 1 / 9 2 : R C V D O W N
T I M E D I S P L A Y
K~Ito enter numeric data or Tel Port No.
– OR –
D to go to next assigned Tel Port No.
B + Ato enter A for Port Numbers 100~109
B + Bto enter B for Port Numbers 110~119
B + Cto enter C for Port Number 120
4 Press G to write the data and display the next Memory Block.
5 Program the next Memory Block or press E to go back on-line.
When UP is assigned in this Memory Block, and a user sets the handset volume to maximum, the volume is reset
to a level to meet FCC standard when the user hangs up.
� Notes �
Telephone Mode
4
Submode
—
Data No.
92
PC Programming
�+BTT
___________________________________________________________________________________
2 - 602 Memory Blocks