Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
1-8-16 Voice Prompt to Tone Assignment
General Description
Use this Memory Block to assign the voice prompt to each tone. Voice prompt is
provided only during the Internal Dial tone or Call Waiting tone.
Display
Settings
Data
No.
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
selection is the
PR1 PR2
default.
Programming Procedures
1 Go off-line.
Table
No.
2 Press LK1 + LK8 + AF to access the Memory Block.
3 Press the corresponding CO/PBX line key to change data option.
Table No. 1: Dial tone
�
Table No. 2: Call Waiting tone
Related Programming
Tone
Name
6 : 0 1 : D T = P R 1
1 6 : 0 1 : D T = P R 1
1
I M E D I S P L A Y
T I M E D I S P L A Y
T
Setting
Data
4 Press G to write the data and advance to Table 02.
5 After entering Table 2 data, press G to write the data. The next Memory Block is displayed.
6 Program the next Memory Block or press E to go back on-line.
Refer to individual features in the Electra Elite IPK Features and Specifications Manual.
Default Values
System Mode
1
Submode
8
Data No.
16
PC Programming
�+AR
Dial Tone: PR1
Call Waiting Tone: PR2
___________________________________________________________________________________
2 - 230 Memory Blocks