Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
Display (R3000 or higher)
Data
No.
Programming Procedures
1 Go off-line.
2 Press LK1 + LK1 +FCto access the Memory Block.
3 Use the dial pad to enter the Data Setting for Class 1.
Setting Data
000s~999s (e.g., 020s = 20s)
4 Press G to write the data and display the next Timer Class of Service.
5 Program the next Timer Class of Service or press E to go back on-line.
Related Programming
Title
M.B. Number Memory Block Name
Timer
Class
1-1-03 Hold Recall Time Selection (Non-Exclusive Hold)
1-2-23 System Call Park Recall Time Selection
4-71 Station to Timer Class of Service (R3000 or higher)
1~4
6 3 : H L D R C L 1 = 0 6 0 s
T I M E D I S P L A Y
Setting
Data
1. When an Exclusive Hold call recalls, the held call switches to a Non-Exclusive Hold call.
� Notes �
Default Values
Class 1~4 = 060s
000s = No Limit
2. Telephone ports 1 and 2 are in Station to Timer Class of Service, Class 1 by default. All other ports are in Station
to Timer Class of Service, Class 2 by default (R3000 or higher).
3. When a system is upgraded from R2500 or lower to R3000 or higher, the Hold Recall Time Selection is reset to
the default value during the upgrade process.
___________________________________________________________________________________
2 - 84 Memory Blocks