Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Electra Elite IPK Document Revision 4
1-10-03 Call by Call Numbering Plan ID
Assignment
General Description
Use this Memory Block to send the Numbering Plan Identification (NPI) for each Route
Advance Block (RAB). This setting data is sent in the NPI field of the CPN-IE (Called
Party Number-Information Element) when making outgoing calls.
Display
Programming Procedures
1 Go off-line.
Data
RAB
01~32 Title
No.
0 1 / 0 3 : N P I = 0 0
2 Press LK1 + LK10 + JC to access the Memory Block. Default Values
3 Enter data using the dial pad.
T I M E D I S P L A Y
Use the following to enter data:
�
JandLto move the cursor
K~Ito enter data
D to select next RAB No.
Setting Data:
�
00 Unknown
01 ISDN Number Plan
02 Reserved (Not Used)
03 Data Numbering Plan (Future)
04~08 Not Used
09 Private Numbering Plan
10~15 Not Used
Setting
Data
4 Press G to write the data. The next Memory Block is displayed.
5 Program the next Memory Block or press E to go back on-line.
All RABs 00
System Mode
1
Submode
10
Data No.
03
PC Programming
�+AY
___________________________________________________________________________________
Programming Manual 2 - 269