Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Electra Elite IPK Document Revision 4
3. DialL, K, andJin sequence. The Multiline Terminal LCD
indicates program mode is now active.
2.5.4 Page Switching
P R O G R A M M O D E
T I M E D I S P L A Y
While off-line, the programming terminal cannot be signaled by
any system station. Off-line mode does not timeout.
In Memory Block 1-1-18 (System Speed Dial Restriction by Tenant)
tenant numbers 00~07 are assigned to Flexible Line keys on the first
page. Tenant number 08~15 are assigned to the Flexible Line keys
on the second page. The tenant number corresponding to Flexible
Line key 1 of the current page is displayed on the right side of the
display.
During system programming, a value (data) is assigned to each
Flexible Line key. When the number of values exceeds the number
of Flexible Line keys, value assignments are displayed on additional
pages. The associated data can be entered on that page. The page
number is displayed on the right side of the LCD.
Figure 1-3 Page Display for 8-Key, and 16-Key Multiline Terminals
shows an example of CO/PBX line keys on each page and their
corresponding tenant numbers. In all cases, each page is
represented by eight line keys.
To navigate between pages, press C to access the next page,
or press A to return to the previous page.
___________________________________________________________________________________
Programming Manual 1 - 9