Electra Elite IPK Programming Manual - Southwestern Telephone ...

Document Revision 4 Electra Elite IPK
___________________________________________________________________________________
4-91 Telephone Ringing Variation
Selection
General Description
Use this Memory Block to assign a Low, Medium, or High ringing tone frequency when
Telephone is specified in Memory Block 1-1-28 (Distinctive Ringing by Telephone or
CO Selection).
Display
Settings
Tel
Port
No.
(01~C0)
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
selection is the
M L H
default.
Programming Procedures
1 Go off-line.
Data
No.
2 Press LK4 + IA to access the Memory Block.
3 Press the line Key to select ringing frequency for Tel Port No.
Use the following to enter data:
�
Jto move the cursor left
Lto move the cursor right
K~Ito enter numeric data or Tel Port No.
– OR –
D to go to next assigned Tel Port No.
B + Ato enter A for Port Numbers 100~109
B + Bto enter B for Port Numbers 110~119
B + Cto enter C for Port Number 120
4 Press G to write the data and display the next Memory Block.
5 Program the next Memory Block or press E to go back on-line.
Related Programming
Title
0 1 / 9 1 : R N G T O N E = M
T I M E D I S P L A Y
M.B. Number Memory Block Name
1-1-28 Distinctive Ringing by Telephone or CO Selection
3-07 CO/PBX Ringing Variation Selection
Setting
Data
Telephone Mode
4
Submode
—
Data No.
91
PC Programming
�+BTM
___________________________________________________________________________________
2 - 600 Memory Blocks