Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Electra Elite IPK Document Revision 4
1-10-21 Call by Call Outgoing/Incoming SFG
Assignment
General Description
Use this Memory Block to specify the outgoing/incoming call service assignment for
the Simulated Facility Group (SFG).
Display
Programming Procedures
1 Go off-line.
Data
SFG
01~16 Title
No.
2 Press LK1 + LK10 + JJBA to access the Memory Block.
3 Enter three or four digit data using the dial pad.
�
�
Use the following to enter data:
JandLto move the cursor
K~Ito enter data
D to select next SFG No.
Setting Data = 01~64
= 99 (Not Specified)
4 Press G to write the data. The next Memory Block is displayed.
5 Program the next Memory Block or press E to go back on-line.
Related Programming
0 1 / 2 1 : O G I C = 9 9
T I M E D I S P L A Y
M.B. Number Memory Block Name
3-03 Trunk-to-Trunk Group Assignment
1-1-30 Route Advance Block Assignment
1-1-46, 47, 48 Access Code (1-, 2-, or 3-Digit) Assignment
1-10-00 Call by Call Type of Network ID Assignment
1-10-01 Call by Call ID Plan Assignment
1-10-02 Call by Call Type of Number Assignment
1-10-03 Call by Call Numbering Plan ID Assignment
1-10-04 Call by Call Network ID Assignment
Setting
Data
Default Values
All SFGs 99
System Mode
1
Submode
10
Data No.
21
PC Programming
�+AY
___________________________________________________________________________________
Programming Manual 2 - 285